Powers Buyers Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Sleeve Anchor - CSK Head<br />
MEDIUM DUTY EXPANSION ANCHORS<br />
The Sleeve Anchor is a pre-assembled single unit<br />
general purpose anchor for a broad range of<br />
applications. The size is the same as that<br />
for the hole which eliminates layout or hole<br />
spotting. Countersunk head anchors are<br />
suitable for flush push-through installation.<br />
Knurling on<br />
cone preventing<br />
free-spinning effect<br />
Threaded tapered cone is<br />
drawn up into expansion<br />
sleeve upon tightening<br />
Countersunk head<br />
Precision stamped tubular<br />
for flush finish<br />
expansion sleeve locks<br />
firmly in the hole<br />
Applications<br />
Medium duty general anchoring of timber and steel fixtures to concrete or masonry.<br />
ZINC YELLOW<br />
Size Length Head Min. Max. Drilled Fixture Torque Drive Box Carton Part<br />
Width Embed Fixture Hole Ø Hole Ø (Nm)<br />
Qty Qty No.<br />
6.5 36 12 30 6 6.5 8 5 PH3 100 1,000 FS6536-PWR<br />
6.5 55 12 30 25 6.5 8 5 PH3 100 1,000 FS6555-PWR<br />
6.5 75 12 30 45 6.5 8 5 PH3 100 1,000 FS6575-PWR<br />
6.5 100 12 30 70 6.5 8 5 PH3 100 1,000 FS65100-PWR<br />
8 60 14 35 25 8 10 10 PH3 50 500 FS0860-PWR<br />
8 85 14 35 50 8 10 10 PH3 50 500 FS0885-PWR<br />
10 75 15.5 40 35 10 12 15 PH3 50 500 FS1075-PWR<br />
10 100 15.5 40 60 10 12 15 PH3 50 400 FS10100-PWR<br />
10 120 15.5 40 80 10 12 15 PH3 50 400 FS10120-PWR<br />
MECHANICAL ANCHORS<br />
Sleeve Anchor - CSK Post Head<br />
SLEEVE ANCHOR COMPONENT<br />
Countersunk post heads have a female threaded<br />
component for fixing to standard hex head sleeve<br />
anchors. They are used in applications where an<br />
aesthetic flush finish is required.<br />
Stainless Steel<br />
countersunk head for<br />
aesthetic flush finish<br />
Female thread fits<br />
<strong>Powers</strong> standard hex<br />
Applications<br />
head sleeve anchors<br />
Converting standard sleeve anchors for aesthetic purposes.<br />
316 S/STEEL<br />
Anchor Internal Head Ø Drilled Fixture Torque Drive Box Carton Part<br />
Size<br />
Thread<br />
Hole Ø Hole Ø (Nm)<br />
Qty Qty No.<br />
6.5 M5 12 6.5 8.5 5 PH3 100 1,000 FPH6.5SS-PWR<br />
8 M6 14 8 10 10 PH3 100 1,000 FPH8SS-PWR<br />
10 M8 15.5 10 12 15 PH3 100 1,000 FPH10SS-PWR<br />
Load Condition<br />
Base Material<br />
Static Load<br />
Quasi-Static<br />
Load<br />
Seismic<br />
Moderate<br />
Wind<br />
High Wind<br />
Concrete<br />
Cracked<br />
Concrete<br />
Aerated<br />
Concrete<br />
Hollow Slab<br />
Stone<br />
Sand / Lime<br />
Stone<br />
Solid Brick<br />
Hollow Brick<br />
Concrete<br />
Block<br />
Cement<br />
Sheet<br />
Plasterboard Hollow Cavity Metal Timber Particle Board<br />
Recommended Recommended With Care Site Tests Recommended<br />
Detailed performance data is available for all <strong>Powers</strong> products<br />
www.powers.com.au<br />
27