Powers Buyers Guide

DIRECT FASTENING
1/4” High Velocity
Drive Pin
POWDER ACTUATED DRIVE PINS 1
1/4” head drive pins are designed for permanently fastening
a fixture to concrete and steel. Compatible with Ramset
J20 & J20S direct acting powder actuated tool.
Length Pin Ø Head Ø Max. Fixture
(Steel)
Max. Fixture
(Concrete)
Box
Qty
Carton
Qty
65 3.7 1/4 56* 49 100 1,000 DP665-PWR
75 3.7 1/4 66* 59 100 1,000 DP675-PWR
Part
No.
*Max. fixture (Steel) for 3mm steel base material thickness allowing 6mm point penetration.
8mm Collated Drive Pin
POWDER ACTUATED DRIVE PINS - COLLATED 2
Collated drive pins with an 8mm diameter head are designed for
permanently fastening a fixture to concrete and steel. Compatible
with Hilti & Ramset powder actuated tool including: DXA40, DXA41,
DX36M, DX351, DX460 & Ramset Frameboss.
Length Pin Ø Head Ø Max. Fixture
(Steel)
Max. Fixture
(Concrete)
Box
Qty
Carton
Qty
16 3.8 8 7* N/A 100 1,000 50240-PWR
19 3.8 8 10* 3 100 1,000 50242-PWR
22 3.8 8 13* 6 100 1,000 50246-PWR
27 3.8 8 18* 11 100 1,000 50248-PWR
32 3.8 8 23* 16 100 1,000 50250-PWR
42 3.8 8 33* 26 100 1,000 50254-PWR
52 3.8 8 43* 36 100 1,000 50258-PWR
62 3.8 8 53* 46 100 1,000 50262-PWR
72 3.8 8 63* 56 100 1,000 50264-PWR
Part
No.
*Max. fixture (Steel) for 3mm steel base material thickness allowing 6mm point penetration.
Fixture Type
Base Material
Range Track Metal Timber Plywood
Metal / Nylon
Strap
Cable Pipe Insulation
Hard Concrete
>50Mpa
1 « « « « « « « « « « «
2 « « « « « « « « « «
Recommended Recommended With Care Site Tests Should Be Implemented
Concrete