Powers Buyers Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MECHANICAL ANCHORS<br />
Vertigo+ <br />
MEDIUM DUTY INTERNAL THREADED ANCHORS - MASONRY<br />
Vertigo+ is a one-piece, all-steel, threaded fastening system with seismic region<br />
qualification for suspending threaded rod in pipe hanging, fire protection, electrical<br />
conduit and cable-tray applications. They are designed for simple fast installations and for<br />
reliable performance to resist static, wind and seismic tension and shear loads in cracked<br />
concrete. Vertigo+ is also qualified for systems designed with redundancy in cracked and<br />
uncracked concrete.<br />
Internally threaded<br />
coupler for easy<br />
removal of service item<br />
Ratchet teeth design that<br />
provides a strong hold<br />
against base material<br />
Can be installed with<br />
an adjustable torque<br />
impact driver<br />
Lower in-place cost,<br />
when compared to<br />
traditional anchors<br />
Approvals & Reports<br />
The following ETA assessment reports can be used to<br />
design anchors in accordance with SA TS 101:2015<br />
which is referenced in the National Construction<br />
Code (NCC) 2016:<br />
ESR-2526 ICC-ES*<br />
Cracked & uncracked concrete<br />
Seismic Loading<br />
ICC-ES SDC A & B<br />
Cracked & uncracked concrete<br />
*Imperial internal threads<br />
Patented dual lead thread<br />
and chamfered tip for fast<br />
Installation and Immediate<br />
high strength loading<br />
Applications<br />
Hanging pipes, sprinkler systems, lighting systems, suspended ceilings, security systems, HVAC ductwork and UNI strut channels.<br />
ZINC YELLOW<br />
Size Length Thread<br />
Min.<br />
Drilled<br />
Drilled Hole Box Carton Part<br />
Depth<br />
Embed<br />
Hole Ø<br />
Depth<br />
Qty Qty No.<br />
M10 54 13 54 3/8 64 50 250 7181SD-M10-PWR<br />
M12 54 13 54 3/8 64 50 250<br />
ZINC YELLOW<br />
7182SD-M12-PWR<br />
*The information on metric product is derived from the ICC-ES Evaluation Report ESR-2526 on Vertigo+ having threaded coupler with imperial internal threads to accommodate imperial size 1/4”,<br />
3/8” and ½” threaded rods. Technical data for Vertigo+ anchors with internal threads of M10 and M12 sizes is derived by using an engineering judgement based on the information given in<br />
ESR-2989 for the 1/4”, 3/8” and 1/2” sizes. Consulting design engineer shall review the ICC-ES report ESR-2989 to verify and approve the derived data before specifying and using the product.<br />
INSTALLATION TOOLS<br />
Description Size Length Drive Box<br />
Qty<br />
Carton<br />
Qty<br />
SDS Plus Drill bit for Vertigo+ 3/8 150 SDS Plus 1 N/A 01316-PWR<br />
Part<br />
No.<br />
Installation<br />
1 2 3 4 5<br />
Load Condition<br />
Base Material<br />
Static Load<br />
Quasi-Static<br />
Load<br />
Seismic<br />
Moderate<br />
Wind<br />
High Wind<br />
Concrete<br />
Cracked<br />
Concrete<br />
Aerated<br />
Concrete<br />
Hollow Slab<br />
Stone<br />
Sand / Lime<br />
Stone<br />
Solid Brick<br />
Hollow Brick<br />
Concrete<br />
Block<br />
Cement<br />
Sheet<br />
Plasterboard Hollow Cavity Metal Timber Particle Board<br />
Recommended Recommended With Care Site Tests Recommended<br />
38 www.powers.com.au Detailed performance data is available for all <strong>Powers</strong> products