Powers Buyers Guide

RIVETS
Dome Head - AA
PREMIUM - DOME HEAD RIVET - ALUMINIUM / ALUMINIUM
The premium grade Aluminium / Aluminium truss head range is made from 5052 grade aluminium alloy wire with
an aluminium alloy mandrel to suit most industrial riveting applications where the possible corrosion of the
remaining steel mandrel is not acceptable.
Corrosion-resistant body of 2.5%
magnesium aluminium alloy
Applications
Joining aluminium or aluminium/zinc coated steel.
Standard low-profile dome head suitable
for most common applications
Size
(Inch)
Size
(mm)
Drill
Ø
Head
Ø
Body
Length
Grip
Range
1/8 3.2 #30 (3.3) 6.4 8.6 3.3 - 4.8 530 670 1,000 10,000 73AA43-PWR
1/8 3.2 #30 (3.3) 6.4 10.2 4.9 - 6.4 530 670 1,000 10,000 73AA44-PWR
1/8 3.2 #30 (3.3) 6.4 11.7 6.5 - 7.9 530 670 1,000 10,000 73AA45-PWR
1/8 3.2 #30 (3.3) 6.4 13.4 8.0 - 9.5 530 670 1,000 10,000 73AA46-PWR
1/8 3.2 #30 (3.3) 6.4 16.5 9.6 - 12.7 530 670 1,000 10,000 73AA48-PWR
5/32 4.0 #20 (4.1) 7.9 10.8 4.9 - 6.4 850 1020 1,000 10,000 73AA54-PWR
3/16 4.8 #11 (4.9) 9.5 8.3 0.5 - 3.2 1160 1420 500 5,000 73AA62-PWR
3/16 4.8 #11 (4.9) 9.5 11.5 4.9 - 6.4 1160 1420 500 5,000 73AA64-PWR
3/16 4.8 #11 (4.9) 9.5 14.6 6.5 - 9.5 1160 1420 500 5,000 73AA66-PWR
3/16 4.8 #11 (4.9) 9.5 17.8 9.6 - 12.7 1160 1420 500 5,000 73AA68-PWR
Shear
(N)
Tensile
(N)
Box
Qty
Carton
Qty
Part
No.
Aluminium AL / AZ Coated Steel Zinc Coated Steel Stainless Steel Copper Brass
« « « ▲ ▲ ▲
Recommended Compatible in rural and mild environments (Some corrosion may occur in marine/industrial environments. Painting both metals will reduce reaction)
Incompatible - must not be in contact
148 www.powers.com.au Detailed performance data is available for all Powers products