Powers Buyers Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SDS - Button Head<br />
SDS SCREW - BUTTON HEAD, FIXTURES TO METAL (0.75 - 2.5) 1<br />
Button head screws have a large low profile head that gives<br />
more bearing over the surface. Used in fixings where there are<br />
two flat surfaces, the flat underside is ideal for metal to metal<br />
connections.<br />
Applications<br />
Foil insulation, wire mesh, brackets, clips to metal 0.75-2.5mm.<br />
Size TPI Length Thread<br />
Length<br />
Drive Head Drilling<br />
Range<br />
Box<br />
Qty<br />
Carton<br />
Qty<br />
Easy<br />
Find<br />
ZINC CLASS 3<br />
8 18 12 Full PH2 BUTTON 0.75 - 2.5 1,000 8,000 430 SDBHZY812-PWR 431 SDBHC30812-PWR<br />
8 18 16 Full PH2 BUTTON 0.75 - 2.5 1,000 6,000 432 SDBHZY816-PWR 433 SDBHC30816-PWR<br />
8 18 20 Full PH2 BUTTON 0.75 - 2.5 1,000 6,000 434 SDBHZY820-PWR 435 SDBHC30820-PWR<br />
8 18 25 Full PH2 BUTTON 0.75 - 2.5 1,000 4,000 436 SDBHZY825-PWR 437 SDBHC30825-PWR<br />
8 18 32 Full PH2 BUTTON 0.75 - 2.5 1,000 3,000 438 SDBHZY832-PWR 439 SDBHC30832-PWR<br />
Part<br />
No.<br />
Easy<br />
Find<br />
Part<br />
No.<br />
SCREWS<br />
SDS - Mushroom Head<br />
SDS SCREW - MUSHROOM HEAD, FACADE PANELS / CLIPDEK TO METAL (1.0 - 3.0) 2<br />
Mushroom head fasteners are designed for applications that require an<br />
aesthetic finish such as the fixing of aluminium facade panels. The low profile<br />
makes them also suitable for fixing clip deck roofing brackets.<br />
Applications<br />
Fixing aluminium facade panels or clip deck roofing brackets.<br />
304 BI-METAL<br />
Size TPI Length Thread Drive Head Drilling Box Carton Easy Part<br />
Length<br />
Range Qty Qty Find No.<br />
12 14 38 Full R2 MUSHROOM 1.0 - 3.0 1,000 N/A 960 SSSDLPC1238-PWR<br />
Fixture Type<br />
Base Material<br />
Range<br />
Plasterboard<br />
Cement<br />
Sheet<br />
Polycarbonate<br />
Soft Wood Hard Wood Treated Pine Particle Board Cladding Roofing Sheet Metal Metal Fixture Metal Frame Steel<br />
Stainless<br />
Steel<br />
Aluminium<br />
AL/AZ Coated Zinc Coated<br />
Steel Steel<br />
1 « « « ▲ « « « ▲<br />
2 « « « « « « « « «<br />
Copper/<br />
Brass<br />
Timber<br />
Recommended Compatible in rural and mild environments (Some corrosion may occur in marine/industrial environments. Painting both metals will reduce reaction) Incompatible - must not be in contact<br />
Detailed performance data is available for all <strong>Powers</strong> products<br />
www.powers.com.au<br />
181
Change language