Powers Buyers Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SDS - CSK Head<br />
Countersunk head screws are suitable for fixing where a flush finish is required such as hinges.<br />
SDS SCREW - CSK HEAD - COARSE THREAD, PRE-DRILLED FIXTURES TO METAL (0.75 - 3.5) 1<br />
Applications<br />
Pre-Drilled hinges, brackets and fixtures to metal 0.75-3.5mm.<br />
ZINC<br />
CLASS 3<br />
Size TPI Length Thread Drive Drilling Box Carton Easy Part<br />
Easy Part<br />
Length<br />
Range Qty Qty Find No.<br />
Find No.<br />
10 16 30 Full PH2 0.75 - 3.5 1,000 4,000 458 SDCCZY1030-PWR 456 SDCCC31030-PWR<br />
10 16 40 Full PH2 0.75 - 3.5 1,000 3,000 459 SDCCZY1040-PWR 457 SDCCC31040-PWR<br />
10 16 65 Full PH2 0.75 - 3.5 500 1,500 465 SDCCC31065-PWR<br />
SCREWS<br />
SDS SCREW - CSK HEAD - AUSTENITIC BI-METAL STAINLESS STEEL 2<br />
Applications<br />
External use. Pre-Drilled hinges, brackets and fixtures to metal 0.75-3.5mm.<br />
302 BI-METAL<br />
Size TPI Length Thread Drive<br />
Drilling Box Carton Easy Part<br />
Length<br />
Range Qty Qty Find No.<br />
10 16 30 Full PH2 0.75 - 3.5 1,000 4,000 922 SSSDCC1030-PWR<br />
SDS SCREW - CSK HEAD - FINE THREAD, PRE-DRILLED FIXTURES TO METAL (1.2 - 3.5) 3<br />
Applications<br />
Internal use. Pre-Drilled hinges, brackets and fixtures to metal 1.2-3.5mm.<br />
ZINC<br />
Size TPI Length Thread Drive<br />
Drilling Box Carton Easy Part<br />
Length<br />
Range Qty Qty Find No.<br />
10 24 30 Full PH2 1.2 - 3.5 1,000 4,000 460 SDCFZY1030-PWR<br />
10 24 40 Full PH2 1.2 - 3.5 1,000 3,000 462 SDCFZY1040-PWR<br />
10 24 50 Full PH2 1.2 - 3.5 500 2,000 464 SDCFZY1050-PWR<br />
10 24 65 Full PH2 1.2 - 3.5 500 1,500 466 SDCFZY1065-PWR<br />
Fixture Type<br />
Base Material<br />
Range<br />
Plasterboard<br />
Cement<br />
Sheet<br />
Polycarbonate<br />
Soft Wood Hard Wood Treated Pine Particle Board Cladding Roofing Sheet Metal Metal Fixture Metal Frame Steel<br />
1 « « « ▲ « « « ▲<br />
2 « « « « « « « «<br />
3 « « « ▲ « « « ▲<br />
Stainless<br />
Steel<br />
Aluminium<br />
AL/AZ Coated<br />
Steel<br />
Zinc Coated<br />
Steel<br />
Copper/<br />
Brass<br />
Timber<br />
Recommended Compatible in rural and mild environments (Some corrosion may occur in marine/industrial environments. Painting both metals will reduce reaction) Incompatible - must not be in contact<br />
Detailed performance data is available for all <strong>Powers</strong> products<br />
www.powers.com.au<br />
183