Powers Buyers Guide

Dome - SS
PREMIUM - DOME HEAD RIVET - STEEL / STEEL
The Steel / Steel truss head range is made from 1006 grade low carbon steel wire with a low carbon content,
zinc plated steel mandrel to suit those applications where tensile or shear dictate a stronger rivet, or where the
joint is comprised of all steel materials.
Standard low-profile dome head
suitable for most common applications
RIVETS
1006 grade low carbon steel
for higher tensile strength
Applications
Joining steel to steel, Steel fabrication, Structural sub-assemblies, Framework, Hinge fixing to steel frames, Steel furniture.
Size
(Inch)
Size
(mm)
Drill
Ø
Head
Ø
Body
Length
Grip
Range
1/8 3.2 #30 (3.3) 6.4 7.0 1.7 - 3.2 1160 1380 1,000 10,000 73SS42-PWR
1/8 3.2 #30 (3.3) 6.4 8.6 3.3 - 4.8 1160 1380 1,000 10,000 73SS43-PWR
1/8 3.2 #30 (3.3) 6.4 10.2 4.9 - 6.4 1160 1380 1,000 10,000 73SS44-PWR
1/8 3.2 #30 (3.3) 6.4 11.7 6.5 - 7.9 1160 1380 1,000 10,000 73SS45-PWR
1/8 3.2 #30 (3.3) 6.4 13.4 8.0 - 9.5 1160 1380 1,000 10,000 73SS46-PWR
1/8 3.2 #30 (3.3) 6.4 16.5 9.6 - 12.7 1160 1380 1,000 10,000 73SS48-PWR
5/32 4.0 #20 (4.1) 7.9 7.6 0.5 - 3.2 1650 2090 1,000 10,000 73SS52-PWR
5/32 4.0 #20 (4.1) 7.9 10.8 4.9 - 6.4 1650 2090 1,000 10,000 73SS54-PWR
5/32 4.0 #20 (4.1) 7.9 14.0 8.0 - 9.5 1650 2090 500 5,000 73SS56-PWR
3/16 4.8 #11 (4.9) 9.5 8.3 0.5 - 3.2 2400 3020 500 5,000 73SS62-PWR
3/16 4.8 #11 (4.9) 9.5 9.8 3.3 - 4.8 2400 3020 500 5,000 73SS63-PWR
3/16 4.8 #11 (4.9) 9.5 11.5 4.9 - 6.4 2400 3020 500 5,000 73SS64-PWR
3/16 4.8 #11 (4.9) 9.5 13.0 6.4 - 7.9 2400 3020 500 5,000 73SS65-PWR
3/16 4.8 #11 (4.9) 9.5 14.6 8.0 - 9.5 2400 3020 500 5,000 73SS66-PWR
3/16 4.8 #11 (4.9) 9.5 17.8 9.6 - 12.7 2400 3020 500 5,000 73SS68-PWR
3/16 4.8 #11 (4.9) 9.5 21.0 12.8 - 15.9 2400 3020 500 5,000 73SS610-PWR
3/16 4.8 #11 (4.9) 9.5 24.2 16.0 - 19.1 2400 3020 250 2,500 73SS612-PWR
1/4 6.4 F (6.5) 12.7 12.7 3.3 - 6.4 4450 5520 250 2,500 73SS84-PWR
1/4 6.4 F (6.5) 12.7 15.9 6.5 - 9.5 4450 5520 250 2,500 73SS86-PWR
1/4 6.4 F (6.5) 12.7 12.7 9.6 - 12.7 4450 5520 250 2,500 73SS88-PWR
Shear
(N)
Tensile
(N)
Box
Qty
Carton
Qty
Part
No.
Aluminium AL / AZ Coated Steel Zinc Coated Steel Stainless Steel Copper Brass
▲ « « ▲ ▲ ▲
Recommended Compatible in rural and mild environments (Some corrosion may occur in marine/industrial environments. Painting both metals will reduce reaction)
Incompatible - must not be in contact
Detailed performance data is available for all Powers products
www.powers.com.au
149