Powers Buyers Guide

More documents

Recommendations

Info

+ Long 24 month shelf life from date of manufacture Long gel/working time Low odour level (Low VOC) Non-sag ideal for overhead application Highly visible red colouration for easy on-site inspection Excellent performance in hammer and diamond core drilled holes 80 www.powers.com.au Detailed performance data is available for all <strong>Powers</strong> products
Pure150-PRO ® 3:1 RATIO STRUCTURAL EPOXY ADHESIVE INJECTION ANCHORING SYSTEM The Pure150-PRO ® is a two-component 3:1 ratio structural epoxy adhesive injection system. High strength adhesive designed for bonding threaded rod, internal threaded sleeve or reinforcement bars into cracked and uncracked concrete and other solid base materials. Consistent performance in uncracked and cracked concrete of variable strength. The design of the Pure150-PRO ® cartridge eliminates the leakage and dispensing problems often found with other systems. Configured with two parallel chambers containing the Component-A base resin and the Component-B hardener. During dispensing the epoxy is pressurised as it Curing Times Base Material Temp (°C) Max Working Time (minutes) Minimum Curing Time (Hours) passes through a unique tapered nozzle containing a series of static mixing elements. As the epoxy components are pumped through the nozzle, they are progressively divided and recombined by the mixing elements to provide an easy, smooth flow, with a perfect mix ratio. + 5°C + 10°C + 20°C + 30°C + 40°C 120 90 30 20 12 50 30 10 6 4 Curing time is for dry concrete. Curing time must be doubled for wet concrete. Approvals & Reports The following ETA assessment reports can be used to design anchors in accordance with SA TS 101:2015 which is referenced in the National Construction Code (NCC) 2016: FIRE RATED ETA-08/0376 ETAG 001-5 Option 1 Threaded rod (M8-M30), internal threaded sleeve (M8-M20) & reinforcing bar (Ø8- Ø32) - cracked & uncracked concrete ETA-11/0352 ETAG 001-5 Option 7 Diamond core holes (Uncracked concrete) ETA-13/0049 ETAG 001-5 TR023 Post installed rebar connection (Ø8-Ø40) ESR-2583 ICC-ES Threaded rod (Cracked & uncracked concrete) Fire Resistance F120 (Threaded Rod) F240 (Rebar Connections) Seismic Loading C1: M12-M30 & rebar Ø12-Ø32. C2: M12-M16 AS/NZS 4020:2005 Drinking water applications NSF/ANSI 61 Portable drinking water certification Pure150-Pro contributes toward satisfying Credit 4.1-Low Emitting Materials under LEED ® . VOC CLASSIFICATION ADHESIVE ANCHORS Applications Structural steel connections, bridges, tunnels, dams & water infrastructure, seismic upgrades, starter bars, railway, roads, post installed reinforcing connections. Description Size Box Qty Carton Qty Part No. 3:1 Cartridge + 2 Mixing Nozzles 385ml 2 10 PURE150PRO-385-PWR 3:1 Cartridge + 2 Mixing Nozzles 585ml 2 10 PURE150PRO-585-PWR Pure Epoxy Mixing Nozzle & Extension - 1 N/A PFPN-PWR Manual Dispensing Tool (3:1) 385/585ml 1 10 CG585-PWR Manual Dispensing Tool (3:1 & 10:1) 3:1 & 10:1 1 10 CGPRO-PWR Battery Dispensing Tool (3:1) + 2 Batteries 385/585ml 1 10 CGB-585-PWR Pneumatic Dispensing Tool (3:1) 585ml 1 10 CGPN585-PWR Installation - Hammer Drilled 1 2 3 4 5 6 7 8 9 2X 2X 2X min. 10 cm 10hr e.g. 20˚C Installation - Core Drilled 1 2 3 4 5 6 7 8 9 10 11 12 2X 2X 2X 2X min. 10 cm 10hr e.g. 20˚C Connection Load Condition Hole Condition Base Material Threaded Rod Internal Threaded Sleeve Reinforcing Bar Overhead Load Static Load Quasi-Static Load Seismic* Moderate Wind High Wind Dry Hole/Wet Concrete Flooded Hole Core Drilled Concrete Cracked Concrete Sand / Lime Stone Solid Brick Stone « ▲ ▲ Hollow Brick Recommended Recommended With Care Site Tests Should Be Implemented *Applies to hammer drilled holes only Detailed performance data is available for all <strong>Powers</strong> products www.powers.com.au 81
Page 1:
BUYERS GUIDE
Page 4 and 5:
Seismic and ETA Approved Powers in-
Page 6:
Power of Evolution Innovation has a
Page 10:
Power of Responsiveness Powers is c
Page 14 and 15:
The Concrete Solution Powers are pr
Page 16 and 17:
CONTENTS MECHANICAL ANCHORS 07 EXPA
Page 18 and 19:
CONTENTS DIRECT FASTENING 103 GAS F
Page 20 and 21:
CONTENTS SCREWS 155 COLLATED NEEDLE
Page 22 and 23:
FIRE RATED Product Selection Guide
Page 24 and 25:
FIRE RATED Product Selection Guide
Page 26 and 27:
Mechanical Anchors SELECTION GUIDEL
Page 28 and 29:
MECHANICAL ANCHORS PB-PRO-S HEAVY D
Page 30 and 31:
Approvals & Reports ETA-09/0317 ETA
Page 32 and 33:
MECHANICAL ANCHORS PTB-SS-ETA1-PRO
Page 34 and 35:
Approvals & Reports The following E
Page 36 and 37:
Blue-Tip Screw-Bolt Blue-Tip Screw
Page 38 and 39:
MECHANICAL ANCHORS TRDAC Tie Down A
Page 40 and 41:
MECHANICAL ANCHORS Sleeve Anchor -
Page 42 and 43:
MECHANICAL ANCHORS Tapper+ ® LIGHT
Page 44 and 45: MECHANICAL ANCHORS DM-PRO Drop-in M
Page 46 and 47: MECHANICAL ANCHORS Hollow Core Anch
Page 48 and 49: Ezy Reach ® OVERHEAD INSTALLATION
Page 50 and 51: MECHANICAL ANCHORS Snake-PRO ® MED
Page 52 and 53: MECHANICAL ANCHORS Vertigo+ MEDIUM
Page 54 and 55: MECHANICAL ANCHORS Vertigo Vertigo
Page 56 and 57: Wedge Nut METAL DECK SUSPENSION FOR
Page 58 and 59: MECHANICAL ANCHORS Tie Wire - Push-
Page 60 and 61: MECHANICAL ANCHORS Vertigo ® - Tie
Page 62 and 63: MECHANICAL ANCHORS PBZ-PRO Ceiling
Page 64 and 65: MECHANICAL ANCHORS Spike ® LIGHT D
Page 66 and 67: MECHANICAL ANCHORS Masonry Nail LIG
Page 68 and 69: MECHANICAL ANCHORS Frame Plug - MB
Page 70 and 71: MECHANICAL ANCHORS Nylon Hammer Scr
Page 72 and 73: MECHANICAL ANCHORS Insulation Fixin
Page 74 and 75: MECHANICAL ANCHORS Nylon Nailin ®
Page 76 and 77: MECHANICAL ANCHORS Nylon Plug - Qua
Page 78 and 79: MECHANICAL ANCHORS Nylon Plug - ML
Page 80 and 81: MECHANICAL ANCHORS Rubber Nut EXPAN
Page 82 and 83: MECHANICAL ANCHORS PVC Plug EXPANSI
Page 84 and 85: MECHANICAL ANCHORS Hollow Wall Anch
Page 86 and 87: MECHANICAL ANCHORS Zip-It ® PLASTE
Page 88 and 89: Packer PLASTIC WINDOW PACKER MECHAN
Page 90 and 91: FIRE RATED VOC CLASSIFICATION Produ
Page 92 and 93: RAPID CURING *Dry concrete at 20°C
Page 96 and 97: + Long 24 month shelf life from dat
Page 98 and 99: Long 18 month shelf life from date
Page 106 and 107: ADHESIVE ANCHORS Chisel Point Stud
Page 108 and 109: Mixing Nozzle INJECTION ADHESIVE AC
Page 110 and 111: Hole Cleaning Accessories STEEL BRU
Page 112 and 113: ADHESIVE ANCHORS Sleeve / Sieve Sle
Page 114 and 115: Power Foam POLYURETHANE EXPANSION
Page 116 and 117: ADHESIVE ANCHORS Glug-Plug 1:1 RAT
Page 118 and 119: Product Selection Guide DIRECT FAST
Page 120 and 121: Direct Fastening SELECTION GUIDELIN
Page 122 and 123: 38mm Direct Fastening SELECTION GUI
Page 124 and 125: Smart fan - ventilator time compute
Page 126 and 127: Swing trigger for effortless firing
Page 128 and 129: Gas Fastening Fuel TRAK-IT ® C3 FU
Page 130 and 131: DIRECT FASTENING High Performance P
Page 132 and 133: DIRECT FASTENING High Performance P
Page 134 and 135: Cable Tie Mount GAS FASTENING ACCES
Page 136 and 137: Conduit Saddle - PVC GAS FASTENING
Page 138 and 139: Power adjustment dial for precise p
Page 140 and 141: Power adjustment dial for precise p
Page 142 and 143: .22 Calibre Single Load POWDER ACTU
Page 144 and 145:
DIRECT FASTENING 8mm Drive Pin - To
Page 146 and 147:
DIRECT FASTENING 1/4” High Veloci
Page 148 and 149:
DIRECT FASTENING Ceiling Clip POWDE
Page 150 and 151:
Insulation Washer - HDPE POWDER ACT
Page 152 and 153:
Rivets SELECTION GUIDELINES Selecti
Page 154 and 155:
Rivets SELECTION GUIDELINES The suc
Page 156 and 157:
Product Selection Guide RIVETS Gene
Page 158 and 159:
RIVETS Multi-Grip - AS MULTI-GRIP -
Page 160 and 161:
RIVETS Countersunk Head - AS PREMIU
Page 162 and 163:
RIVETS Dome Head - AA PREMIUM - DOM
Page 164 and 165:
RIVETS Dome - STST PREMIUM - DOME H
Page 166 and 167:
RIVETS Sealed - TA PREMIUM - SEALED
Page 168 and 169:
Professional Rivet Tool RIVET INSTA
Page 170 and 171:
Product Selection Guide SCREWS Coll
Page 172 and 173:
Product Selection Guide SCREWS SDS
Page 174 and 175:
Screws SELECTION GUIDELINES The des
Page 176 and 177:
Screws DESIGN GUIDELINES Class 4 Co
Page 178 and 179:
Collated - SDS SDS SCREW - BUGLE HE
Page 180 and 181:
SCREWS SDS - Hex Head Coarse SDS SC
Page 182 and 183:
SDS - Hex Head Coarse SDS SCREW - H
Page 184 and 185:
SDS - Hex Head No.5 Point SDS NO.5
Page 186 and 187:
SDS Roofing - Zip-It SDS ROOFING S
Page 188 and 189:
SCREWS SDS Roofing - Crest Grip SD
Page 190 and 191:
SCREWS SDS Roofing - Cyclonic Suita
Page 192 and 193:
SDS - Hex Head Metal Shed SDS SCREW
Page 194 and 195:
SDS - Wafer Head SDS SCREW - WAFER
Page 196 and 197:
SDS - Pan Head Pan head screws have
Page 198 and 199:
SDS - Bugle Head SDS SCREW - BUGLE
Page 200 and 201:
SDS - SFS Irius ® Head SCREWS The
Page 202 and 203:
Needle Point - Flat Tops NEEDLE POI
Page 204 and 205:
SCREWS Needle Point - Hex Head NEED
Page 206 and 207:
SCREWS Type 17 - Hex Head TYPE 17 S
Page 208 and 209:
Type 17 Roofing - Dekfast TYPE 17
Page 210 and 211:
SCREWS Type 17 Roofing - Cyclonic S
Page 212 and 213:
Type 17 Roofing - Crest-Grip TYPE
Page 214 and 215:
Type 17 - Bugle Batten Bugle batten
Page 216 and 217:
SCREWS Smart Bit ® Decking Tools T
Page 218 and 219:
Chipboard - Self Embedding Head Chi
Page 220:
Australia Vic (Head Office) Level 2
show all

Powers Buyers Guide

Create successful ePaper yourself

Delete template?

Save as template?