COGNEX DM100_200 ControlCommands - Bci GmbH

DMCC Overview
SET|GET MULTICODE.IDENTICAL-
SYMBOLS
SET|GET MULTICODE.MAX-NUM-
CODES
SET|GET MULTICODE.SORT-
PRIORITY
SET|GET MULTICODE.HORIZONTAL-
REVERSE
SET|GET MULTICODE.IMAGE-
REVERSE
SET|GET MULTICODE.SYMBOLOGY-
REVERSE
SET|GET MULTICODE.VERTICAL-
REVERSE
Technology Preview
return a successful
read only if
number of codes
found equals
MULTICODE.NUM-
CODES value
DM100 series and
DM200 series only.
state [ON|OFF] enable/disable Enables/disables
output of identical
symbols when
multicode is
enabled.
DM100 series and
DM200 series only.
symbology
number
symbology
image
vertical
position
horizontal
position
state
state
state
state
[0-4]
[1-128]
[0-3]
[0-3]
[0-3]
[0-3]
0: Total for all
symbologies
1: Data Matrix
2: QR Code
3:
1D/Stacked/Postal
4: Vericode
Range for all four
arguments
indicates sort
priority. Must be
different for each
criteria.
[ON|OFF] ON: sort right to
left
OFF: sort left to
right
[ON|OFF] ON: sort last
image first
OFF: sort first
image first
[ON|OFF] ON: Vericode, 1D,
QR Code, Data
Matrix
OFF: Data Matrix,
QR Code, 1D,
Vericode
[ON|OFF] ON: sort bottom
to top
OFF: sort top to
bottom
Page 12 of 24
The expected
maximum number
of codes to find for
each symbology
grouping 1 - 4; no
expected value for
any single
symbology can
exceed parameter
0, the total
number of codes
to find
DM100 series and
DM200 series only.
Sorting order for
multicode results.
Horizontal
positional sorting
order priority.
Image sorting
order preference.
Symbology sorting
order preference.
Vertical position
sorting order
preference.
SET|GET TRAIN.INCREMENTAL state [ON|OFF] enable/disable Indicates whether
incremental
training is used
during the next
attempt to train.
SET|GET TRAIN.AUTO-DISABLE state [ON|OFF] enable/disable Indicates whether
untrained
symbology groups
will be disabled
after the next
attempt to train.
file://C:\Dokumente und Einstellungen\schiermann\Lokale Einstellungen\Temp\~hh7...
27.12.2010