COGNEX DM100_200 ControlCommands - Bci GmbH
COGNEX DM100_200 ControlCommands - Bci GmbH
COGNEX DM100_200 ControlCommands - Bci GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DMCC Overview<br />
Technology Preview<br />
DMCC Commands marked with are pre-release documentation. These functions are provided as is in DataMan<br />
Software version 3.5. Future releases may change syntax or remove functionality altogether.<br />
DataMan Control Commands Documentation 3.5<br />
Decoder Commands<br />
Technology Preview<br />
DMCC Commands marked with are pre-release documentation. These functions are provided as is in DataMan<br />
Software version 3.5. Future releases may change syntax or remove functionality altogether.<br />
Symbology Commands<br />
FoV will be used for<br />
image acquisition.<br />
Set/Get Command Arguments Range Meaning Description<br />
SET|GET DECODER.1D-LEARN-<br />
ORIENT<br />
SET|GET DECODER.ROI left (multiple<br />
of 8)<br />
right (multiple<br />
of 8)<br />
top (multiple<br />
of 4)<br />
bottom<br />
(multiple of 4)<br />
state [ON|OFF] enable/disable Learn Orientation of 1D<br />
Symbols<br />
[0...]<br />
[left+64...]<br />
[0...]<br />
[top+64...]<br />
pixels from<br />
left<br />
pixels from<br />
left<br />
pixels from<br />
top<br />
pixels from<br />
top<br />
SET|GET DECODE-ATTEMPTS number [0-6] Number of<br />
decode<br />
attempts per<br />
setup.<br />
SET|GET TRIGGER.THRESHOLD option<br />
SET|GET TRIGGER.POLARITY option<br />
DataMan Control Commands Documentation 3.5<br />
[0-8]<br />
0: 0.1 ms<br />
1: 0.25 ms<br />
2: 0.5 ms<br />
3: 1 ms<br />
4: 2.5 ms<br />
5: 5 ms<br />
6: 10 ms<br />
7: 25 ms<br />
8: 50 ms<br />
[0-1] 0: Rising edge<br />
1: Falling<br />
edge<br />
Decoder Region of<br />
Interest<br />
Image Region<br />
examined by decoder<br />
for enabled symbols.<br />
Pixel coordinates are<br />
relative to the upper<br />
left corner of the<br />
displayed image. Left <<br />
Right and Top <<br />
Bottom.<br />
Values must be outside<br />
the specified<br />
CAMERA.FOV settings<br />
Number of Decode<br />
Attempts<br />
DM7500 Series only.<br />
The reader uses all<br />
enabled setups unless<br />
a decode operation is<br />
successful.<br />
The debounce<br />
threshold used by the<br />
debounce algorithm.<br />
The polarity at which<br />
an input trigger will be<br />
initiated<br />
Set/Get Command Arguments Range Meaning Description<br />
file://C:\Dokumente und Einstellungen\schiermann\Lokale Einstellungen\Temp\~hh7...<br />
Page 8 of 24<br />
27.12.2010
Change language