COGNEX DM100_200 ControlCommands - Bci GmbH

More documents

Recommendations

Info

DMCC Overview SET|GET TELNET.PORT value [0- 65535] Technology Preview DMCC Commands marked with are pre-release documentation. These functions are provided as is in DataMan Software version 3.5. Future releases may change syntax or remove functionality altogether. Cognex Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex Corporation makes no warranties, either express or implied, regarding the described software, its merchantability or its fitness for any particular purpose. The information in this document is subject to change without notice and should not be construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or the associated software. Copyright © 2010 Cognex Corporation All Rights Reserved content with result. file will be created if it does not exist. DM200 series only Telnet server TCP port on reader. DM200 series only SET|GET CUSTOM-CMD.TRIGGER state [ON|OFF] enable/disable Indicates if reader will respond to the TRIGGER-ON or TRIGGER-OFF string. SET|GET CUSTOM-CMD.TRIGGER- ON SET|GET CUSTOM-CMD.TRIGGER- OFF string String that will start a trigger. See the Overview topic for formatting requirements for the string argument. string String that will stop a trigger. See the Overview topic for formatting requirements for the string argument. SET|GET CUSTOM-CMD.ECHO state [ON|OFF] enable/disable Indicates if characters received between a COMMAND-HEADER and COMMAND-FOOTER are echoed. SET|GET CUSTOM- CMD.COMMAND-HEADER SET|GET CUSTOM- CMD.COMMAND-FOOTER string Start of the string to be echoed. string End of the string to be echoed. See the Overview topic for formatting requirements for the string argument. SET|GET INTER-MESSAGE.DELAY value [0-1000] milliseconds Transmission delay between buffered read strings. DM7550 Series only SET|GET COM.WAKEUP state [ON|OFF] enable/disable Wakeup Message SET|GET PROTOCOL mode DataMan Control Commands Documentation 3.5 Copyright Information [0-1] 0: DMCC-only 1: Legacy Mode Page 22 of 24 This document may not be copied in whole or in part, nor transferred to any other media or language, without file://C:\Dokumente und Einstellungen\schiermann\Lokale Einstellungen\Temp\~hh7... 27.12.2010
DMCC Overview the written permission of Cognex Corporation. The hardware and portions of the software described in this document may be covered by one or more of the U.S. patents listed on the Cognex web site http://www.cognex.com/patents.asp. Other U.S. and foreign patents are pending. DataMan Control Commands Documentation 3.5 Licensed Software PCRE Licence PCRE is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. Release 5 of PCRE is distributed under the terms of the "BSD" licence, as specified below. The documentation for PCRE, supplied in the "doc" directory, is distributed under the same terms as the software itself. Written by: Philip Hazel University of Cambridge Computing Service, Cambridge, England. Phone: +44 1223 334714. Copyright (c) 1997-2004 University of Cambridge All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: � Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. � Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. � Neither the name of the University of Cambridge nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE End JPEG software This software is based in part on the work of the Independent JPEG Group. zlib compression library This software is based in part on the work of Jean-loup Gailly and Mark Adler. Parsifal XML Parser Copyright (c) 2002-2005 Toni Uusitalo released to the public domain 2002-11-15 http://www.saunalahti.fi/~samiuus/toni/xmlproc/ Parsifal is free for both commercial and non-commercial use and redistribution, provided that author's copyright and disclaimer are retained intact. You are free to modify Parsifal for your own use and to redistribute Parsifal with your modifications, provided that the modifications are clearly documented. DISCLAIMER This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of Merchantability or fitness for a particular purpose. Please use it AT YOUR OWN RISK. lwIP TCP/IP stack Copyright (c) 2001-2004 Swedish Institute of Computer Science. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, file://C:\Dokumente und Einstellungen\schiermann\Lokale Einstellungen\Temp\~hh7... Page 23 of 24 27.12.2010
Page 1 and 2: DMCC Overview DataMan Control Comma
Page 3 and 4: DMCC Overview TRIGGER state [ON|OFF
Page 5 and 6: DMCC Overview SET|GET PRESENT.NEVER
Page 7 and 8: DMCC Overview Setup to be modified
Page 9 and 10: DMCC Overview SET|GET 2D.ALGORITHM
Page 11 and 12: DMCC Overview Symbology SET|GET SYM
Page 13 and 14: DMCC Overview DMCC Commands marked
Page 15 and 16: DMCC Overview Validation Tokens Tok
Page 17 and 18: DMCC Overview SET|GET DVALID.ISO- C
Page 19 and 20: DMCC Overview Technology Preview le
Page 21: DMCC Overview SET|GET NET-LOCAL.GAT

COGNEX DM100_200 ControlCommands - Bci GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?