RUT240_manual_v1_9

Recommendations

Info

Step 3 (LAN) Next, you are given the chance to configure your LAN and DHCP server options. For a detailed explanation see LAN under Network. Step 4 (Wi-Fi) The final step allows you to configure your wireless settings in order to set up a rudimentary Access Point. When you’re done with the configuration wizard, press Save. 9.2 Profiles Router can have 5 configuration profiles, which you can later apply either via WebUI or via SMS. When you add New Profile, you save current full configuration of the router. Note: profile names cannot exceed 10 symbols. 136
9.3 Administration 9.3.1 General Field name Explanation 1. Router name Enter your new router name. 2. Host name Enter your new host name 3. New Password Enter your new administration password. 137
Page 1 and 2:
USER MANUAL RUT240 4G Router
Page 3 and 4:
Table of Contents Legal notice ....
Page 5 and 6:
8 Services ........................
Page 7 and 8:
SAFETY INFORMATION In this document
Page 9 and 10:
1 Introduction Thank you for purcha
Page 11 and 12:
3 Setting up your router 3.1 Instal
Page 13 and 14:
We first must set up our network ca
Page 15 and 16:
Right click on the Wireless network
Page 17 and 18:
6 Status The status section contain
Page 19 and 20:
System explanation: Field Name Samp
Page 21 and 22:
Mobile information: Field Name Samp
Page 23 and 24:
LAN information: Field Name Sample
Page 25 and 26:
6.3.1.4.2 Access Point Display info
Page 27 and 28:
6.3.1.7 OpenVPN Server Display Open
Page 29 and 30:
Field Name Sample Value Explanation
Page 31 and 32:
6.5 Services The page displays the
Page 33 and 34:
Page 35 and 36:
6.7.2 Realtime Load This tri-graph
Page 37 and 38:
6.7.4 Realtime Wireless Displays th
Page 39 and 40:
6.8 Mobile Traffic Displays mobile
Page 41 and 42:
7 Network 7.1 Mobile 7.1.1 General
Page 43 and 44:
1.1.1.1.1 Passthrough mode Using Pa
Page 45 and 46:
7.1.2.2 SMS Warning Configuration F
Page 47 and 48:
7.2.2.1.1 Static: 7.2.2.1 General S
Page 49 and 50:
Field name Sample value Explanation
Page 51 and 52:
7.2.2.2.4 IP Aliases IP aliases are
Page 53 and 54:
7.3 LAN This page is used to config
Page 55 and 56:
Page 57 and 58:
7.3.2.4.2 Advanced Settings You may
Page 59 and 60:
7.4.1.1 Device 7.4.1.1.1 Advanced S
Page 61 and 62:
7.5 VLAN On this page you can confi
Page 63 and 64:
7.6.2 DMZ By enabling DMZ for a spe
Page 65 and 66:
address only 9. External port 22 Ma
Page 67 and 68:
6. Source MAC any Match incoming tr
Page 69 and 70:
Field Name Sample value Explanation
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
7.7.2 Dynamic Routes 7.7.2.1 Genera
Page 77 and 78:
7.7.2.3 General Protocol Field name
Page 79 and 80:
8.2 Web Filter 8.2.1 Site blocking
Page 81 and 82:
8.4 VPN 8.4.1 OpenVPN VPN (Virtual
Page 83 and 84:
You can set custom settings here ac
Page 85 and 86: 8.4.2 IPSec The IPsec protocol clie
Page 87 and 88: Field name Value Explanation 1. Enc
Page 89 and 90: Field name Explanation 1. Enabled C
Page 91 and 92: name Explanation 1. Enable Enable c
Page 93 and 94: 8.5 Dynamic DNS Dynamic DNS (DDNS)
Page 95 and 96: 8.6 SMS Utilities RUT240 has extens
Page 97 and 98: when this rule is met. Enable SMS S
Page 99 and 100: Important Notes: 3G settings must
Page 101 and 102: 15. Force Config update from server
Page 103 and 104: 8.6.2 Call Utilities Allow users to
Page 105 and 106: 8.6.4 SMS Management 8.6.4.1 Read S
Page 107 and 108: 8.6.5 Remote Configuration RUT240 c
Page 109 and 110: 13. Primary SIM card SIM1/SIM2 A SI
Page 111 and 112: 8.7 SNMP SNMP settings window allow
Page 113 and 114: 8.8 SMS Gateway 8.8.1 Post/Get Conf
Page 115 and 116: http://192.168.1.1/cgi-bin/sms_tota
Page 117 and 118: 8.9 Hotspot Wireless hotspot provid
Page 119 and 120: 8.9.2 Internet Access Restriction S
Page 121 and 122: 8.9.4 Landing Page 8.9.4.1 General
Page 123 and 124: Field name Explanation 1. Enable Ac
Page 125 and 126: 8.11 Auto Reboot 8.11.1 Ping Reboot
Page 127 and 128: 8.12 Input/Output 8.12.1 Main infor
Page 129 and 130: 8.12.3 Input Allows you to set up i
Page 131 and 132: Field name Sample Explanation 1. En
Page 133 and 134: Field name Sample Explanation 1. En
Page 135: 9 System 9.1 Setup Wizard The confi
Page 139 and 140: Field name Explanation 1. System lo
Page 141 and 142: Field name Explanation 1. Enable SS
Page 143 and 144: Field name Explanation 1. Host Ente
Page 145 and 146: 9.4 User scripts Advanced users can
Page 147 and 148: Field name Explanation 1. Server ad
Page 149 and 150: 11 Glossary WAN - Wide Area Network
show all

RUT240_manual_v1_9

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?