2018 Replacement Parts Catalog

Nozzles | 159
Hand-Held Applicator Nozzles
AD-31, AD-41, and FP-200 Hand-Held Applicators
AD-31 and FP-200 Swirl and Wide
Pattern Swirl Nozzles
Orifice Diameter
mm (in.)
Wide Pattern
Swirl
Swirl (1)
0.20 (0.008) 104100
0.25 (0.010) 104101
0.31 (0.012) 860548
0.36 (0.014) 860574
0.41 (0.016) 860575
0.46 (0.018) 860226
0.51 (0.020) 860435
0.64 (0.025) 125607 100728
0.76 (0.030) 131998 810381
1.02 (0.040) 810382
1.17 (0.046) 131635
1.27 (0.050) 810300
(1) Use retainer part number 119202 for H-200 or part
number 102406 for AD-31.
Swirl nozzles
(patented)
FP-200 Extended Nozzles
Orifice Diameter
mm (in.)
Extended Extrusion
0.64 (0.025) 710245
1.07 (0.042) 709018
1.55 (0.061) 710246
2.29 (0.090) 724268
4.75 (0.187) 703223
NOTE: FP-200 extrusion hand-held applicators can also use H-200 style
nozzles if the applicator module is part number 276119.
AD-31 and AD-41 Single-Bead
Nozzles
Orifice Diameter
mm (in.)
Short
Thread
238xxx
Long
Extended
Nozzles
AD-41
LBS
0.51 (0.020) 238252
0.76 (0.030) 238253
1.02 (0.040) 238254
1.07 (0.042) 274968
1.52 (0.060) 238256
1.55 (0.061) 274969
1.57 (0.062) 804387
2.29 (0.090) 238259 274970
2.36 (0.093) 271683
3.18 (0.125) 271684
3.30 (0.130) 274971
3.96 (0.156) 271685
NOTE: Nozzles can be used with L4, L5, and L7 hand-held applicators.
AD-31 long extended nozzle
Retainer
238XXX
Short-thread nozzle
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733, or online at www.enordson.com.
International orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com.