2018 Replacement Parts Catalog

73230 Series Right-Angle Aim Single-Orifice Nozzles for M-100 and
E-100XT Modules
Part Number
1040121 Nozzle, single orifice, 0.015 in. diameter
1040126 Nozzle, single orifice, 0.020 in. diameter
1040128 Nozzle, single orifice, 0.025 in. diameter
1040140 Nozzle, single orifice, 0.030 in. diameter
1022662 Nozzle, single orifice, 0.040 in. diameter
1022663 Nozzle, single orifice, 0.050 in. diameter
1022664 Nozzle, single orifice, 0.060 in. diameter
Description
73483 Series Finger Nozzle Bar Assemblies for M-100 and E-100XT
Modules
Nozzle blanks are recommended with finger nozzle bar assemblies, as many applications do not require the use of
all orifices.
Consult a Nordson representative for right and left usages. A right bar faces to the right when viewed from the front of
the stainless wear cap.
Part Number
Description
1023030 Nozzle, E1, 5 orifice, tape conversion, left hand, 3/8 in. spacing
1023031 Nozzle, E1, 5 orifice, tape conversion, right hand, 3/8 in. spacing
1023032 Nozzle, finger AIM, 1 orifice, left hand, 2.5 in. spacing
1023033 Nozzle, finger AIM, 3 orifice, .375 in. spacing
1023034 Nozzle, finger bar, 1 orifice, right hand, 2.5 in. spacing
1023035 Nozzle, finger AIM, 5 orifice, .375 in. spacing
1023036 Nozzle, finger AIM, 7 orifice, .375 in. spacing
Part Number 1035808 Precision Slot Nozzle for Coating—Slot Nozzle
Bar with Blank Shim
The precision slot nozzle is used to produce a wide band of adhesive in a continuous or intermittent pattern.
This nozzle bar assembly has a 2.0 in. wide body and utilizes interchangeable shims to obtain the desired
deposition width.
The shim is modified by the end user in order to produce the desired pattern.
Nozzles | 165
Special Nozzles
M-100 and E-100XT Modules
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733, or online at www.enordson.com.
International orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com.