Impact Report 2018 StreetwiZe • Mobile School

DESIGN technical Manual of mobile school
10/10/2017 • 12/02/2018
Sara Orozco (intern/volunteer)
Rob Sweldens
Standardised production
mobile schools
Munsterbilzen / Belgium
Since the start of Mobile School, the production
of the mobile schools is centralised and
executed by the Provinciale Secundaire School
Bilzen (PSSB).
In 2016-2017, a new design of the mobile
school was developed and the first prototype
was sent to Patras in Greece in November
2016. Since then, some changes have been
made based on feedback from the field.
Sara Orozco, a Colombian student of Product
Design did her internship at Mobile School
in 2017 and started with the development of
assembly manuals for all the parts of the
mobile school, in cooperation with the teachers
of the PSSB. The idea was to create an IKEAlike
guideline for the production of the mobile
school.
IMPACT
After her internship, Sara continued her
A clear guideline for the mobile school production
work as a volunteer. She created seperate
Technical drawings of the different parts of the mobile school
chapters for the motion system, the outside
box, the inside box, the chalkboard panels
and the final assembly of all the parts.
A quicker procedure to produce the mobile school
Thanks to this Assembly Manual, the production
is now more standardised than before. We
A more standardised procedure to produce the mobile school
now also have a clear guideline of how the mobile
school is produced, which is a first back-up
in case we would lose or alter our partnership
with PSSB in the future.
22 23