Weidmueller PLC-interface units, front adapters and prefabricated cables.

Card holders
SKH2 Card holders
SKH2 31
SKH2 D32 LP
Card holders
Card holders are used for adapting Euro cards (19”) to plug
connectors to IEC 603/DIN 41612 and DIN 41617.
• Screw connection
• Installed on rail TS 35 with accessories
Technical data
H
Connection data
Connection on control side
Type (control side)
Number of poles (control side)
Contact assembly
Design of the pluggable board
Rated data
Rated voltage
Rated current per connection
General data
Ambient temperature (operational)
Storage temperature
Approvals
Insulation coordination (EN 50178)
Rated insulation voltage
Surge voltage category
Pollution severity level
Pulse voltage test (1,2/50μs)
Plug-in connector, acc. to DIN 41617 female
31-pole female
a and b
100x160 mm euro format for 19“ racks
125V AC / 150V DC
4 A
0...55°C
-40...60 °C
CE
< 150 V AC
II
2
1.5 kV
Plug-in connector, acc. to DIN 41612 female
32D
32-pole female
a and c
100x160 mm euro format for 19“ racks
250 V UC
4 A
0...55°C
-40...60 °C
CE
250 V
II
2
2.1 kV
Dimensions
Clamping range, min./max. (field)
Length x width x height
0.13 mm² / 6 mm²
60.7 mm / 160 mm / 192.5 mm
0.13 mm² / 6 mm²
55 mm / 160 mm / 192.5 mm
Note
Ordering data
Type Qty. Order No.
SKH2 31 LP 1 8174800000
Type Qty. Order No.
SKH2 D32 LP 1 8174830000
Note
Accessories
Note
Kit for connection to TS35 8209340000
Kit for connection to TS35 8209340000
H.4 2021570000