Weidmueller PLC-interface units, front adapters and prefabricated cables.

RS IO - Passive interface for digital signals
Universal solutions for PLC input/
output cards
RS IO - Interface
for 16 digital signals 3-wire R system
Digital input/output passive interface
• 1, 2 or 3 wires
• With LED indicator (optional)
• With fuse or disconnection per channel (optional)
• Fuse powered protection
• Screw or tension clamp connection
RS 16IO 3W I R
R system, 3 wires with disconnection per channel
A
Technical data
Connection data and functionality
Connection on control side
Number of poles (control side)
LED status display per channel
LED status of the supply voltage
Fuse per channel
Power supply fuse
Type of test point
Rated data
Operating voltage
Max. current per channel
Operating voltage (supply)
Operating current (supply)
General data
Ambient temperature (operational)
Storage temperature
Approvals
Insulation coordination (EN 50178)
Rated insulation voltage
Surge voltage category
Pollution severity level
Pulse voltage test (1,2/50μs)
Dimensions
Clamping range, min./max. (field)
Clamping range, min./max. (supply)
Mounting rail
Length x width
Note
Connector RSV 1.6
24-pole female
No
No
No
3.15 A
No
150 V UC
1 A
24 V DC ± 10%
3 A
-25...50°C
-40...60 °C
CE; EAC
250 V AC
II
2
1.5 kV
Screw connection
0.13 mm² / 6 mm²
0.13 mm² / 6 mm²
TS 32, TS 35
116 mm / 109 mm
The common C may carry up to 3 A if the external jumpers are not used
Ordering data
Screw connection without LED
Type Height Order No.
RS 16IO 3W I R S 84 mm 9441600000
Note
Accessories
Note
A.50 2021570000