Weidmueller PLC-interface units, front adapters and prefabricated cables.

RS A - Passive interface for analogue signals
RS A - Interface
for 4 analogue signals for Schneider M258
Analogue input/output passive interface:
• With test points or disconnection per channel (optional)
• Screw or tension clamp connection
RS 4AIO DP-M258 SD
4 channels for M258 (Schneider), config. by voltage or current
Universal solutions for PLC input/
output cards
A
Technical data
Connection data and functionality
Connection on control side
Number of poles (control side)
LED status display per channel
LED status of the supply voltage
Power supply fuse
Type of test point
Rated data
Operating voltage
Max. current per channel
Operating voltage (supply)
Operating current (supply)
General data
Ambient temperature (operational)
Storage temperature
Approvals
Insulation coordination (EN 50178)
Rated insulation voltage
Surge voltage category
Pollution severity level
Pulse voltage test (1,2/50μs)
D-sub connectors, acc. to IEC 60807 / DIN 41652
15-pole plug
No
No
No
No
≤ 25 V AC / 50 V DC
0.5 A
24 V DC ± 10%
3 A
-20...50°C
-40...60 °C
CE; EAC
< 50 V AC
III
2
0.8 kV
Dimensions
Clamping range, min./max. (field)
Clamping range, min./max. (supply)
Mounting rail
Length x width
Note
Screw connection
0.13 mm² / 6 mm²
0.13 mm² / 6 mm²
TS 32, TS 35
45 mm / 70 mm
Ordering data
Screw connection
Type Height Order No.
RS 4AIO DP-M258 SD S 60 mm 1289090000
Note
Accessories
Note
2021570000
A.57