Weidmueller PLC-interface units, front adapters and prefabricated cables.

Card holders
SKH
SKH E48
SKF F32 Z+B
Card holders
Card holders are used for adapting Euro cards (19”) to plug
connectors to IEC 603/DIN 41612 and DIN 41617.
• Screw connection
• Installed on rail TS 35 with accessories
Technical data
H
Connection data
Connection on control side
Type (control side)
Number of poles (control side)
Contact assembly
Design of the pluggable board
Rated data
Rated voltage
Rated current per connection
General data
Ambient temperature (operational)
Storage temperature
Approvals
Insulation coordination (EN 50178)
Rated insulation voltage
Surge voltage category
Pollution severity level
Pulse voltage test (1,2/50μs)
Plug-in connector, acc. to DIN 41612 female
48E
48-pole female
e, c, a
100x160 mm euro format for 19“ racks
125V AC / 150V DC
4 A
0...55°C
-40...60 °C
CE
< 150 V AC
II
2
1.5 kV
Plug-in connector, acc. to DIN 41612 female
32F
32-pole female
z and b
100x160 mm euro format for 19“ racks
250 V UC
4 A
0...55°C
-40...60 °C
CE
250 V
II
2
2.1 kV
Dimensions
Clamping range, min./max. (field)
Length x width x height
0.13 mm² / 6 mm²
69 mm / 131 mm / 144 mm
0.13 mm² / 6 mm²
50.8 mm / 131 mm / 144 mm
Note
Ordering data
1 clamping bracket
2 clamping brackets
Type Qty. Order No.
SKH E48 LP2/LP 1 0690660000
Type Qty. Order No.
SKH F32 (Z&B) LP RH2 1 0586861001
Note
Accessories
Note
Kit for connection to TS35: Installation motherboard 2054280000 and mounting
foot to TS35 0687900000
Kit for connection to TS35: Installation motherboard 2054280000 and mounting
foot to TS35 0687900000
H.8 2021570000