2.2 BSP Rel. 1.0 for PPMC-275 Programmer's Guide
2.2 BSP Rel. 1.0 for PPMC-275 Programmer's Guide
2.2 BSP Rel. 1.0 for PPMC-275 Programmer's Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
List of APIs API Call Reference<br />
void ethPortReset(ETH_PORT ethPortNum)<br />
This routine resets the chip by aborting any SDMA engine activity<br />
and clearing the MIB counters. The Receiver and the Transmit unit<br />
are in idle state after this command is per<strong>for</strong>med and the port is<br />
disabled.<br />
INPUT<br />
ETH_PORT<br />
ethPortNum<br />
Ethernet Port number. See ETH_PORT enum.<br />
OUTPUT Channel activity is halted.<br />
RETURN None.<br />
void ethernetSetConfigReg(ETH_PORT ethPortNum, unsigned int value)<br />
This function sets specified bits in the given ethernet configuration<br />
register.<br />
INPUT<br />
ETH_PORT<br />
ethPortNum<br />
unsigned<br />
int value<br />
Ethernet Port number. See ETH_PORT enum.<br />
32 bit value.<br />
OUTPUT The set bits in the value parameter are set in the configuration register.<br />
RETURN None.<br />
void ethernetResetConfigReg(ETH_PORT ethPortNum, unsigned int value)<br />
This function resets specified bits in the given Ethernet configuration<br />
register.<br />
INPUT<br />
ETH_PORT<br />
ethPortNum<br />
Ethernet Port number. See ETH_PORT enum.<br />
5 - 36 VxWorks 5.5/Tornado <strong>2.2</strong> <strong>BSP</strong> <strong>Rel</strong>. <strong>1.0</strong> <strong>for</strong> <strong>PPMC</strong>-<strong>275</strong>
Change language