Configuration Manual AC Induction Motors 1PH4 - Siemens ...

More documents

Recommendations

Info

Table of Contents xiv Space for your notes © Siemens AG 2003 – 2006 All rights reserved AC Induction Motors, 1PH4 (APH4) – 04.06 Edition
Motor Description 1.1 Overview Given the compact design of modern machines, the heat loss from electrical drives can have an adverse effect on the accuracy of machining. The consequential requirement for cold motors at high power densities led to the development of 1PH4 water–cooled motors. Furthermore, a combination of high torque and small construction volume (low mass inertia) results in short acceleration and braking times and thus in a reduction in non–productive time. 1PH4 motors are robust, 4–pole squirrel–cage induction motors. Power loss and noise emission are reduced to a minimum. Thanks to the compact design of the motors, high maximum speeds can be achieved. The motors are equipped with an encoder system for sensing the motor speed and indirect position. In machine tools, the encoder system is capable of C–axis operation as standard – that is, an additional encoder is not required for C–axis operation. Fig. 1-1 1PH4 induction motor © Siemens AG 2003 – 2006 All rights reserved AC Induction Motors, 1PH4 (APH4) – 04.06 Edition 1 1-15
Page 1: Configuration Manual 04/2006 Editio
Page 4 and 5: SIMODRIVE® documentation Printing
Page 6 and 7: Foreword Commissioning software Add
Page 8 and 9: Foreword Explanation of symbols The
Page 10 and 11: x Foreword Caution � Motors shoul
Page 12 and 13: Foreword Disposal xii Motors must b
Page 16 and 17: Motor Description 1.1 Overview Bene
Page 18 and 19: Motor Description 1.3 Technical des
Page 20 and 21: Motor Description 1.4 Order designa
Page 22 and 23: Motor Description 1.6 Cooling 1.6 C
Page 24 and 25: Motor Description 1.6 Cooling Coola
Page 26 and 27: Motor Description 1.7 Bearing desig
Page 28 and 29: Motor Description 1.8 Electrical co
Page 30 and 31: Motor Description 1.9 Mounting 1.9
Page 32 and 33: Motor Description 1.9 Mounting Natu
Page 34 and 35: Technical Data and Characteristics
Page 58 and 59: Motor Components 3.1 Thermal motor
Page 60 and 61: Motor Components 3.2 Encoders 3-60
Page 62 and 63: Motor Components 3.3 Holding brake
Page 64 and 65:
Motor Components 3.3 Holding brake
Page 66 and 67:
Motor Components 3.4 Gearboxes Gear
Page 68 and 69:
Motor Components 3.4 Gearboxes 3.4.
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Motor Components 3.4 Gearboxes 3-78
Page 80 and 81:
Dimension Drawings 2 3 4 5 6 7 8 1
Page 82 and 83:
2 3 4 5 6 7 8 1 Dimension Drawings
Page 84 and 85:
References /APH7S/ Configuration Ma
Page 86 and 87:
References 5-86 Notes © Siemens AG
Page 88 and 89:
Index 6-88 Space for your notes ©
Page 92:
Siemens AG Automation & Drives Moti
show all

Configuration Manual AC Induction Motors 1PH4 - Siemens ...

Create successful ePaper yourself

Delete template?

Save as template?