Configuration Manual AC Induction Motors 1PH4 - Siemens ...

Motor Components
3.3 Holding brake
Selection data
The holding brakes described here cannot be used together with the two–speed
selector gearbox.
Technical data
1) Coil temperature 20 °C
3-62
Table 3-4 Holding brake selection
Holding brake for motors, SH 100 to SH 160 Order code
Motor is prepared for mounting a holding brake;
holding brake is mounted by the customer.
G95
Motor with mounted ZF holding brake G46
Table 3-5 Technical data, holding brake
SH [mm] ZF type Order No. Holding
torque
[Nm]
Power
drain 1)
[W]
Closing time
[ms]
100 EB 3M 2LX2 146–0 30 20 100
132 EB 8M 2LX2 145–0 100 34 130
160 EB 8M 2LX2 145–0 100 �� ���
© Siemens AG 2003 – 2006 All rights reserved
AC Induction Motors, 1PH4 (APH4) – 04.06 Edition