Configuration Manual AC Induction Motors 1PH4 - Siemens ...

Motor Description
1.3 Technical design, options
1.3 Technical design, options
Table 1-2 Options
Technical feature Version
Terminal box arrangement Terminal box mounted left or right
Balancing Half–key balancing (dynamic) (acc. to DIN ISO 8821)
Marking: ”H” at the shaft face
Shaft end Cylindrical; without keyway and without key
(acc. to DIN 748, Part 3); solid shaft
Tolerance field k6 (to SH 132)
Tolerance field m6 (to SH 160)
Bearing version
(DE)
Flange adapter,
smooth running characteristics
Vibration severity
(acc. to IEC 60034–14)
1-18
Single bearing for coupling output or planetary gear mounting;
bearing design for increased speeds
Tolerance R (acc. to DIN 42 955)
Mounted/integrated components � Selector gearbox
� Holding brake
Grade S (single/duplex bearing)
Grade SR for SH 100 to 160 (single bearing)
Rating plate 2nd rating plate, supplied loose
© Siemens AG 2003 – 2006 All rights reserved
AC Induction Motors, 1PH4 (APH4) – 04.06 Edition