Sections

Intended Use
With a clean crescent shape and classic
full baffle design, Cerra Direct Accents
can be applied successfully in a variety of
applications in commercial and retail
spaces. These elegant luminaires complement
the Cerra Baffle and Cerra Direct
suspended products enabling them to be
used together on projects.
Available in 1-lamp T8, T5, and T5HO, Cerra
Direct Accent offers three diffuser options
to provide varying degrees of brightness
and light control. A 1’ and 2’ sconce
version is also available.
Features
Full-baffle style crescent form. Nominal
3” x 7” size.
Wall-mount and decorative sconce.
Indirect, Indirect/Open or Perforated
Extruded aluminum spline with one-piece
aluminum baffle and steel and die-cast
aluminum endcap.
Available in 1-lamp T8, T5, and T5HO lamp
configurations.
Three diffusers are available, each providing
varying degrees of brightness.
Two standard finishes are available; white
low-gloss and natural aluminum. Optional
custom colors also available on spline
and end plates.
Listing – UL Listed to US and Canadian
safety standards.
Suspended Architectural
Cerra ®
Direct
Accents
Peerlite / PSG8
NEW
Ordering Information Example: CDW8 2 54T5HO 40FT R8 277 GEB10 DCT LP835 C100 GMF
Fixture
CDW8 wall
mount
CDA8 angle
mount
Lamps
1 32
1 28T5
1 54T5HO
Number of lamps
in cross section
and lamp type.
Baffle options1 (blank) Straight blade baffle with
intermediate brightness
diffuser (standard)
OPD Straight blade baffle with
standard brightness diffuser
OPL Straight blade baffle with low
brightness diffuser
Fixture
CDS8 Sconce
Lamps
1
2
Number of lamps
in cross section.
Rows and
sections2 _FT R4
_FT R8
_FT R12
Voltage
120
277
3473 Ballast 1,4
(blank) None
GEB
GEB10
Number of emergency/
night-light sections1 (blank) None
_SE ___ sections*
* May specify up to number
of fixture sections per run.
Baffle options
OPL Straight blade baffle
with low brightness
diffuser (standard)
OPI Straight blade baffle
with intermediate
brightness diffuser
Emergency nightlight
type 1,5
(blank) None
EL Emergency
battery pack
EN Battery pack/
night-light
combination
EC Emergency
circuit/nightlight
circuit
L/LP
Lamp color
No lamp
LP730 3000 ° K, 70 + CRI
LP735 3500 ° K, 70 + CRI (standard T8)
LP741 4100 ° K, 70 + CRI
LP830 3000 ° K, 80 + CRI
LP835 3500 ° K, 80 + CRI (standard T5/
T5HO)
LP841 4100 ° K, 80 + CRI
Max. section
length
U1 1'
U2 2'
Voltage
120
277
Switching
SCT Single
circuit
DCT Dual
circuit
Ballast type 3
GEB10
Finish
C041 White
(standard)
C100 Natural
aluminum
Consult Peerlite Color
Ordering Guide for other
color options.
Options
ELH Emergency
through-wire with
separate feed
ELS Emergency
through-wire with
single feed
NYC New York code
GLR Fusing, fast-blow
GMF Fusing, slow-blow
NOTES:
1 Optional.
2 Specify nominal row length in 4' increments.
R4/R8/R12 indicates maximum length of section.
Example: 40FT R12 is a 40' run with a 12'
maximum section length. Consult factory for
additional increments.
3 EL, EN, dimming ballast not available with
347V.
4 GEB = generic electronic ballast,