Sections

Drawings are for dimensional detail only and may
not represent actual mechanical configuration.
UCPSF
GFWG
LGA
LUCPSF
LUCPDF
UCP
UCPDF
WGG
LGG
HOCS
LUCP
HOCS Hook, Cord and Reloc OCS Connector. Same in function as LOCS, except diecast
hook. To order, specify voltage. Available in 120/347V only in Canada.
For additional information, see Reloc OCS component.
LUCP Loop, Universal Cord and Plug. Use with UPM1. Provides conventional loop,
three feet of 16-gauge, 105°C SEO cord and UCP plug. Factory prewired.
Height is 3-1/2".
LUCPSF Loop, Universal Cord, Plug with Single Fusing. Use with UPM1. Provides
conventional loop, three feet of 16-gauge, 105°C SEO cord and UCP plug.
Factory prewired. Loop height is 3-1/2".
LUCPDF Loop, Universal Cord, Plug with Double Fusing. Use with UPM1. Provides
conventional loop, three feet of 16-gauge, 105°C SEO cord and UCP plug.
Factory prewired. Loop height is 3-1/2".
UCP Universal Cord and Plug. Use with UPM (Universal Power Module.) 16gauge,
105°C SEO cord and plug to connect to UPM provides complete
power module assembly. Factory prewired.
UCPSF Universal Cord and Plug with Single Fuse. Use with UPM for Dead Front
Fusing. Single fuse (120, 277V). If UPM UCP option is used in conjunction
with fusing, the fusing will be installed in UCP plug head. Shipped installed.
UCPDF Universal Cord and Plug with Double Fuse. Use with UPM for Dead Front
Fusing. Double Fuse (208, 240, 480V). If UPM UCP option is used in conjunction
with fusing, the fusing will be installed in UCP plug head. Shipped
installed.
OCS RELOC OCS Connector. Comes attached to steel ballast housing (hook and
cord standard). To order, specify voltage. For additional information, see
RELOC OCS component, page 577.
Wire Guards – shipped installed
These wire guards ship attached to lens ring or require reflector modification.
Must be ordered with fixture. Wire guards for open reflectors are on
page 561.
WGG17 Wireguard. Use with TE, E17 reflector. Must be ordered with fixture.
WGG22 Wireguard. Use with TE, E22 reflector. Must be ordered with fixture.
WG Wireguard for TXP-A26, TXS-A30, TXC-A23, TXL-A20, THS-A16GL or TPGE
reflector. Must be ordered with fixture.
GFWG16 Glass Full Wireguard. Use with TPGE-PG16GLE and TPGE-PG16AGLE. Must
be ordered with fixture.
GFWG21 Glass Full Wireguard. Use with TPGE-PG21GLE and TPGE-PG21AGLE. Must
be ordered with fixture.
WGA14 Wireguard. Use with THV-A14 reflector. Must be ordered with fixture;
requires factory-drilled reflector. Ships as: WGA14 U, WGA14 J4 and
WGA14 J12.
Louver Guards – shipped installed
Options Options and and and Accessories
Accessories
Accessories
Louver guards for glass-lensed units attaches to lens ring. Must be ordered
with fixture. Louver guards for open reflectors are on page 394.
LGG17 Louver Guard. Use with TE-E17 reflector; requires factory-drilled reflector.
Ships as LGG17U, LGG17 J4, LGG17 J12.
LGG22 Louver Guard. Use with TE-E22 reflector; requires factory-drilled reflector.
Ships as LGG22U, LGG22 J4, LGG22 J12.
www.lithonia.com
Indoor HID / PSG8
391