Sections

Non-IC Rated Full Reflectors – All reflectors are damp location listed. Lensed
reflectors are wet location listed. Maximum ceiling thickness 1/2". Consult factory for thicker
ceiling applications.
Open Reflector Baffle
Open Wallwash With Kicker
F6O2 White F6B3 Black
F6O2A Clear Diffuse 4 F6B3W White
F6O2AZ Clear Specular 4
F6O2G Gold Diffuse 4
F6O2GZ Gold Specular 4
F6C3BL Black Specular Cone
Glass Lensed
* Plastic flange on lens trims may be required for use above motorized tubs or spas.
Non-IC Horizontal Lamp Frame-In
F6W1 White
F6W1A Clear Diffuse 4
F6W1G Gold Diffuse 4
6-1/2” 6-1/2”
6-1/2”
2/26DTT 2/26DTT 2/26DTT
Drop Opal
F6LD3 White Splay
F6LDB3 Black Baffle
Flat White
F6LF3 White Splay
F6LFB3 Black Baffle
Fresnel
F6L4 White Splay
F6LB4 Black Baffle
Tempered Prismatic
F6LF73 White Splay
F6LFB73 Black Baffle
5-1/2”
Polycarbonate Lensed (Shower/Closet)
Opal
F6LD1 PF* Drop, Plastic Flange
F6LF1 PF* Flush, Plastic Flange
Prismatic
F6LD2 PF* Drop, Plastic Flange
F6LF2 PF* Flush, Plastic Flange
ADEZ Advance Mark X 2 electronic dimming
ballast ,120V or 277V, 18DTT and
26DTT only.) Requires four-pin lamp
(Philips lamp). Min. dimming level 5%.
DMHL Lutron Hi-Lume 3 solid-state dimming
ballast, 120V or 277V, 18DTT and
26DTT only. Requires four-pin lamp.
Min. dimming level 5%.
Fluorescent Downlights
6" Fluorescent
Twin-Tube (TT)
Double Twin-Tube (DTT)
Intended Use
Recessed Frame-In rated Non-IC for New Construction applications. Approved
for all wiring types and all ceiling types, including air-handling plenums.
Features
Thermally protected against improper contact with insulation and approved
for through-branch circuit wiring.
Rugged galvanized steel frame and J-box.
Factory-installed, captive bar hangers span 24" and feature built-in nailers
and T-bar clips.
Socket housing attaches to reflector to ensure proper and consistent
lamp position.
Encased-and-potted, HPF electromagnetic ballast standard.
Available with multi-volt (MVOLT), 120V through 277V, electronic ballast
with end-of-life protection.
Reflector is secured to frame-in by mechanical trim retention.
Vertically adjustable yoke allows for flush and secure mounting of reflectors
to ceiling.
Damp location listed. (See reflector selection for wet location listed
reflectors.)
UL listed to US and Canadian safety standards.
Ordering Information Example: LF6 2/13TT 120
Series
LF6
2/26DTT
Lamps
2/9TT
2/13TT
2/13DTT
2/18DTT
2/26DTT
5-1/2”
Volts
MVOLT 1
120
277
347
2/26DTT
www.lithonia.com
keyword: LF6
Options
IMPORTANT: Frame-ins and reflectors are packaged and shipped as separate
components. For details on ordering and packaging options, see
page 272.
Lithonia Downlighting / PSG8
LF6
GEB10 Generic electronic ballast, THD (total
harmonic distortion)