Sections

Features
Shaft – Constructed by the filament winding
process from thermosetting polyester
resin and contains a minimum of 65 percent
"E" type fiberglass by weight. The filament
windings are continuously applied
with uniform tension and are placed on the
pole helically at low angles to provide
axial strength. Additional windings are
placed on the pole in a circular manner to
provide compressive strength.
Round Tapered Fiberglass
Anchor Base – Heavy-duty, A356-T6 aluminum
base casting which is permanently
bonded to the outside of the fiberglass
shaft.
Anchor Bolts – Top 12" galvanized per
ASTM A-153. Made of 5 /8" or 1" diameter
steel rod having a minimum-yield strength
of 55,000 psi.
Hand hole – An oval, non-metallic,
2½"x5" hand hole secured with a vandalresistant,
stainless steel ½" socket head
screw.
Technical Information
EPA (ft 2 ) with 1.3 gust
Nom. Pole Bolt Bolt Approx.
Catalog mount. shaft size 80 90 100 Max. circle size ship wt.
number ht. (ft.) (in. x in. x ft.) mph mph mph wt. (in.) (in. x in. x in.) (lbs.)
RTF 10 5-4X 10 5.4 x 4.1 x 10 19.0 14.6 11.4 150 8 5/8 x 21 x 3 23
RTF 12 5-6X 12 5.6 x 4.1 x 12 16.0 12.1 9.3 150 81/2 5/8 x 21 x 3 28
RTF 14 5-9X 14 5.9 x 4.1 x 14 14.0 10.4 7.9 150 81/2 5/8 x 21 x 3 32
RTF 16 6-1X 16 6.1 x 4.1 x 16 10.0 7.4 5.5 100 81/2 5/8 x 21 x 3 36
RTF 20 6-6X 20 6.6 x 4.1 x 20 8.2 5.8 4.1 100 91/2 5/8 x 21 x 3 45
RTF 20 7-3X 20 7.3 x 4.6 x 20 14.4 11.1 8.9 200 111/2 1 x 30 x 4 62
RTF 25 6-7X 25 6.7 x 4.1 x 25 5.4 3.4 2.0 100 91/2 1 x 30 x 4 55
RTF 25 7-3X 25 7.3 x 4.6 x 25 9.6 7.3 5.7 200 111/2 1 x 30 x 4 75
RTF 30 8-4X 30 8.4 x 4.6 x 30 11.2 8.5 6.7 100 111/2 1 x 30 x 4 106
RTF 30 8-5X 30 8.5 x 4.8 x 30 15.6 12.0 9.5 200 111/2 1 x 30 x 4 140
RTF 30 10-5X 30 10.5 x 6.6 x 30 28.7 22.4 17.4 300 141/2 1 x 30 x 4 202
RTF 35 8-4X 35 8.4 x 4.6 x 35 5.5 3.8 2.7 100 111/2 1 x 30 x 4 125
RTF 35 8-5X 35 8.5 x 4.8 x 35 8.5 6.2 4.7 200 111/2 1 x 30 x 4 161
RTF 35 11-2X 35 11.2 x 6.6 x 35 21.8 16.6 12.5 300 15 11/4 x 36 x 6 248
RTF 40 11-7X 40 11.7 x 6.2 x 40 6.4 4.3 2.4 165 151/2 11/4 x 36 x 6 165
RTF 40 11-8X 40 11.8 x 6.4 x 40 12.2 8.8 6.0 300 151/2 11/4 x 36 x 6 227
RTF 40 12X 40 12.0 x 6.9 x 40 25.8 19.3 14.3 300 151/2 11/4 x 36 x 6 317
RTF 45 11-7X 45 11.7 x 6.2 x 45 3.9 2.0 0.6 300 151/2 11/4 x 36 x 6 183
RTF 45 11-9X 45 11.9 x 6.6 x 45 15.2 10.9 7.6 300 151/2 11/4 x 36 x 6 295
Shaft Bolt Bolt
Pole Data
Base Anchor
base circle projection square bolt Template
size A B C description number
5.4" 8" 3" 7.75" ABRTF-5-4 PJ50108
5.6" 8.5" 3" 8.125" ABRTF-5-6 PJ50109
5.9" 8.5" 3" 8.125" ABRTF-5-9 PJ50110
6.1" 8.5" 3" 8.125" ABRTF-6-1 PJ50111
6.6 9.5" 3" 8.8" ABRTF-6-6 PJ50112
6.7" 9.5" 3" 8.8" ABRTF-6-7 PJ50113
7.3" 11.5" 4" 11" ABRTF-7-3 PJ50114
8.4" 11.5" 4" 11" ABRTF-8-4 PJ50115
8.5" 11.5" 4" 11" ABRTF-8-5 PJ50116
10.5" 14.5" 4" 13.3" ABRTF-10-5 PJ50117
11.2 15" 4" 13.5" ABRTF-11-2 PJ50118
11.7" 15.5" 4" 14" ABRTF-11-7 PJ50119
11.8" 15.5" 4" 14" ABRTF-11-8 PJ50120
11.9" 15.5" 4" 14" ABRTF-11-9 PJ50121
12.0" 15.5" 4" 14" ABRTF-12-0 PJ50122
www.lithonia.com
keyword: RTF
18"
Anchor Base Poles
C
A
B
Outdoor / PSG8
RTF
Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof, high-strength
plastic cap provided with all drill-mount
poles.
Finish – The pole is ultraviolet-resistant
and pigmented approximately the same
color as the final polyurethane coating.
Dark bronze (DDB) is standard.
Ordering Information: See page 494
(Note: Poles are available only in U.S.)
INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.
513