Sections

Intended Use
For entrances, loading docks, walkways
and vehicle ramps.
Features
Housing – Rear housing is rugged, die-cast
aluminum. Corrosion-resistant, captive external
hardware includes slotted hex-head
and tamperproof fasteners. Finish is dark
bronze (DDB) corrosion-resistant polyester
powder.
Optics – Reflector is aluminum, finished in
white enamel. Front housing and refractor
are one-piece, injection-molded, UVstabilized
polycarbonate. Standard finish
an opaque portion of front cover and
back housing is dark bronze polyester.
Refractor is sealed and gasketed to inhibit
the entrance of outside contaminants.
Electrical – HPS, 70-150M: High-reactance,
high-power factor (XHP). 175MH
and MV: Constant-wattage autotrans-
Lamp/Fixture/Ballast Data 9
Lamp Base
Wattage Ballast Type Type
High Pressure Sodium (med/clear)
35 RHP E17 medium
50 RHP E17 medium
70 XHP E17 medium
100 XHP E17 medium
150 XHP E17 medium
Metal Halide (med(70/100/150)/mogul(175)/clear)
50 HX-HPF E17 medium
70 HX-HPF E17 medium
100 HX-HPF E17 medium
150 HX-HPF E17 medium
175 CWA BT28 mogul
Mercury Vapor (mog/coated)
100 CWA E17 medium
175 CWA BT/ED28 mogul
Low Pressure Sodium (D.C. bay/clear)
35 HPF-LAG T17 medium
H
Building Mounted
TWP
Ordering Information Example: TWP 175M TB LPI
Designation
High Pressure Sodium
TWP 35S1,2 TWP 50S1 TWP 70S
TWP 100S
TWP 150S3 Metal Halide
TWP 70M
TWP 100M
TWP 150M
TWP 175M
Mercury Vapor
TWP 100H
TWP 175H
Low Pressure Sodium
TWP 35L1 Incandescent
TWP 200I
Voltage
120
2084 2404 277
347
4804 TB5 NOTES:
1 Not available with 480V or TB.
2 120V only.
3 Operates 55V lamp.
4 Consult factory in Canada; not available with 35S, 50S and
150M.
5 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada
120V, 277V, 347V; ships as 120V/347V.
6 Lamp not included.
7 Quartz lamp wattage not to exceed ballast wattage rating.
8 Black finish on housing only.
9 Other ballast types available.
Cast Wall-Paks, Polycarbonate Refractor
former. Ballast is copper wound and 100%
factory tested. UL listed. Electrical components
mounted on back housing.
Installation – Top ¾" threaded wiring access.
Back access through ¾" opening.
For feed-thru wiring, use condulet tee
(not included). Mount on any flat, noncombustible
vertical surface.
Socket – Glazed porcelain (mogul base),
horizontally oriented socket with copper
alloy, nickel-plated screw shell and center
contact. Medium-base for 150W and below:
UL listed 660W, 600V, 4KV pulse rated.
Mogul-base for 175W: UL listed
1500W, 600V, 4KV pulse rated.
Listings – UL Listed (standard). CSA or
NOM Certified (see Options). UL listed for
wet locations. IP65 rated in accordance
with IEC standard 529.
Installed
SF Single fuse (120V, 277V, 347V) 1
DF Double fuse (208V, 240V, 480V) 1
EC Emergency circuit 6,7
QRS Quartz restrike system 6,7
CR Enhanced corrosion resistance
CRT Non-stick protective coating 8
PE Photoelectric cell, button type 1
LPI Lamp included as standard
L/LP Less lamp
FS Full shield
www.lithonia.com
keyword: TWP
Options/Accessories
WG Wireguard
SCWA Super CWA pulse start
ballast (150M only)
RHP Reactor high power factor
Ballast (HPS only)
RNP Reactor normal power factor
ballast (HPS only)
XHP Reactance high power
factor ballast (HPS only)
CSA CSA Certified
NOM NOM Certified (consult
factory)
Architectural Colors (optional)
DNA Natural aluminum
DBL Black
DMB Medium bronze
DWH White
DSS Sandstone
Accessories (Order separately)
RK1 PEB1 Photoelectric control kit, 120V
RK1 PEB2 Photoelectric control kit, 208V,
240V, and 277V.
RK1 PEB1 CSA Photoelectric control kit, 120V
RK1 PEB3 CSA Photoelectric control kit, 347V
RK1 TWPFA FS Field installable shield for cutoff
Dimensions are shown in inches (centimeters) unless
otherwise noted.
TWP
Height 157/16 (39.2)
Width 161/8 (41)
Depth 73/4 (19.7)
Weight 16 lbs (7 kg)
W D
Outdoor / PSG8
475