Sections

More documents

Recommendations

Info

Fixture/Ordering Compatability Example: THC 400M A15 120 KW1S Series TE THC THS THP THR THV TXS TXP TXC TXL TXR TXV TXS SH SX SPG Sensor Operation Intended Use The KiloWatch ® II Integral Sensor System is designed for maximum control. Each unit contains an integral sensor that mounts directly to the reflector. Application opportunities include warehouses or select storage areas within manufacturing facilities. Features SYSTEM Solid state relay Dual level or 2 separate capacitors SCWA or CWA ballast only Passive infrared sensor with Fresnel Lens Adjustable time delay .5 to 20 minutes 15 minute start up timer. Green LED Activity Indicator SENSOR Up to 45-foot mounting height Mounts to reflector via adjustable bracket Bi-Level Lighting with Integral Sensor System • 360° coverage within the luminaire’s lighting distribution Size: circular, 3.9” dia., 1.34” deep Color: white Relative humidity: 20% to 90% non-condensing Operating temperature: 14°F to 131°F, (-10°C to 55°C) LT option operating temperature: -40°F to 131°F, (-40°C to 55°C) Listings - UL Listed to U.S. and Canadian safety standards. KiloWatch Option Designations: KW1S – Luminaire supplied with 120V AC control components. AC sensor controlled systems (120/208/240/347/480V). Reduces wattage by 50%. KW150S – Luminaire supplied with 120V AC control components. AC sensor controlled systems (120/208/240/347/480V). Reduces light output by 50%. Optical Voltage 150S E17 A125 120 KW1S CRT DCY 250S E22 A165 208 TEF DHX 400S A15 PA16 240 TR DSQ 1000S A16 PA22 277 SCWA FWG 100MP A17 PA22C 347 RC3NP GFWG 175MP A22 PA22SP 480 LCPP HC3P 175M A14 PA25ALE LC3P HKF 200M A26 PA25D HC3P HKM 200MP A30 PA22GLE HOCS HKMG 250M A23 PA22N HOCU LC3P 250MP A20 LOCS LGG 300M 300MP 320M NOTES: LOCU CF LPF 1 50% power. 2 50% lumen. 1 KW150S2 KW1S LT1 KW150 LT2 Wattage/lamp Options 320MP 350M 350MP 400M 400MP SF 450M DF 450MP QRS 1000M QRSTD 1000MP EC GL TOB T73 CR For option compatibility, See pages 395 and 397. Accessories LPM LPMG PPH TPH SCK SCK48 SCK108 SMB18 SMB24 TMB30 TMB48 WG WGG The control is accomplished through an integral passive infrared sensor mounted to the reflector. Upon initial power-up, a timer brings the lamp to full operating temperature for a preset 15-minute period. Once the unit is warmed up, the sensor switches the unit to the low mode, then relies on heat changes caused by body movement or moving equipment within the sensor coverage to switch the unit to full lumen output from a pre-selected level (50% power or 50% lumen). The high level delay controls the time that the fixture remains in the high mode after motion is no longer sensed. This adjustment is factory set at approximately 75 seconds (minimum), but may be adjusted if required. The available range is 75 seconds to approximately 30 minutes. www.lithonia.com keyword: KW HID Control System KiloWatch ® II Description KW1S KiloWatch integral sensor unit (50% power) KW150S KiloWatch integral sensor unit (50% lumen) KW1S LT KiloWatch intergal sensor unit (50% power), Low temperature KW150S LT KiloWatch integral sensor unit (50% lumen), Low temperature SENSOR COVERAGE CHART Indoor HID / PSG8 NEW 387
Options and Accessories Ballast Options – Shipped installed 388 CWI Constant Wattage Isolated Ballast. 120, 208, 240 & 480V. Not available in all fixtures. Consult factory. MRB Magnetic Regulator Ballast. 70- 400W HPS. For use in heavy industrial areas. Not available in all voltages and fixtures. ENC Encapsulated Ballast. Use with all voltages up to 450W MH and 400W HPS. Not available in all fixtures. GEB Electronic Ballast. Operates 320, 350 and 400W pulse start lamps between 200 & 277V. Not available in all fixtures. Indoor HID Options – Shipped installed SF Single Fuse. Use with 120, 277, 347V. Not available with Multi-tap or Multi-volt Ballast. In-line fusing isolates luminaire from circuit. Externally accessible. DF Double Fuse. Use with 208, 240, 480V. Not available with Multi-tap or Multi-volt Ballast. In-line fusing isolates luminaire from circuit. Externally accessible. HA High Ambient. Allows the Industrial luminaires to be operated in high ambient temperatures. TXS, TXP, TXL, TXC, TXV: 55°C; THV, THC, THS, THP, TE, TPG, TPGE: 65°C. EC Emergency Circuit. Factory-installed, double-contact, bayonet-base quartz socket with socket leads for use with separate external emergency power system. (See chart at right). Lamp not included. QRS Quartz Restrike System. Factory-installed, double-contact, bayonet-base quartz socket with socket leads. Automatically switches 120V quartz lamp on if there is a power interruption or brownout significant enough to cause the primary HID lamp to drop out. The 120V quartz lamp stays on until the HID fixture restrikes. QRS does not energize during cold start of HID luminaires. Wiring for the quartz lamp is internal to the ballast assembly; the 120 volts required to operate the quartz lamp is supplied by the ballast. Wattage of quartz lamp should not exceed that of HID source (See chart at right). Lamp not included. QRSTD Quartz Restrike System Time Delay. Factory-installed, double-contact, bayonet-base quartz socket with socket leads. Functions as does QRS, but 120V quartz lamp energizes under hot and cold starting conditions. Quartz lamp will come on when luminaire is energized and remain on for two minutes after startup or restrike. Wiring for the quartz lamp is internal to the ballast assembly; the 120 volts required to operate the quartz lamp is supplied by the ballast (See chart at right). Lamp not included. Indoor HID / PSG8 LLRPSL Pulse Start Metal Halide Linear Reactor Ballast. Energy saving ballast. 277V only for 150-450W pulse start metal halide lamps. Use in areas where line dip tolerance is not critical. Not available in all fixtures. SCWA Pulse Start Metal Halide Super Constant Wattage Autotransformer Ballast. Energy saving alternative to CWA. 120, 208, 240, 277 & 480V for 150-1000 watt pulse start lamps. Not available in all fixtures. SCWI Pulse Start Metal Halide Super Constant Wattage Isolated Ballast. 120, 208, 240V, for 400W pulse start lamps. Consult factory. www.lithonia.com Note: Some Indoor HID options require an accessory to complete the assembly. Necessary accessories are noted below and listed on pages 398-399. RLB Pulse Start Metal Halide Regulated Lag Ballast. Energy saving ballast for heavy industrial areas. 120, 208, 240, 277 & 480V for 175-400 watt pulse start lamps. Not available in all fixtures. LLSCWA Pulse Start Metal Halide Low Loss Super Constant Wattage Autotransformer Ballast. Consumes less power than SCWA. Not available in all fixtures. Pulse Start H.I.D. Ballast/Lamp Systems Product MH Wattage HPS Wattage Quartz Wattage TE, THC, THS, 150 & below THP, THV, TPG 175-200 100 SH A14, SH A15, 250-400 150 SH A16 1000 250 500 THS-A16GL 400 & below 100 & below 100 SH A16GL 200 100 250 150 400 250 250 TXC, TXL, 100 & below 100 TXP, TXS, 175 150 SX A23 250 250 400 250 TXR, TXV 100 & below 100 SH PA22 175-400 150 THR 100 & below 100 150-200 150 250-400 250 1000 150 TG, TGL, TGR 250 & below 100 TPGE 100 & below 100 & below 100 1000 & below 150-200 150 250-400 100 1000 150 250 500
Page 3 and 4:
www.AcuityBrandsLighting.com SECTIO
Page 5 and 6:
Old English .......................
Page 7 and 8:
GC Surface Squares ................
Page 9 and 10:
The Acuity Brands Lighting Group is
Page 11 and 12:
www.lithonia.com features a complet
Page 13 and 14:
The Photometric Viewer software pro
Page 15 and 16:
www.lithonia.com CONTENTS Parabolic
Page 17 and 18:
The Optimax Solution Optimax is a u
Page 19 and 20:
Intended Use Ideal for corridors, s
Page 21 and 22:
Intended Use High-performance deep-
Page 23 and 24:
Intended Use Deep-cell parabolic lu
Page 25 and 26:
Intended Use High performance parab
Page 27 and 28:
Intended Use Side-mounted diffuser,
Page 29 and 30:
Intended Use An exceptional general
Page 31 and 32:
Description AVSM AV 1x2 AV 1x4 2AV
Page 33 and 34:
Intended Use Delivers wall illumina
Page 35 and 36:
Intended Use Recessed open (or lens
Page 37 and 38:
Intended Use Specification premium,
Page 39 and 40:
Intended Use Complete selection of
Page 41 and 42:
Intended Use Low-profile, static T8
Page 43 and 44:
Intended Use Full family of surface
Page 45 and 46:
Intended Use Surface or stem-mounte
Page 47 and 48:
Intended Use For applications where
Page 49 and 50:
Intended Use For applications requi
Page 51 and 52:
Intended Use For applications that
Page 53 and 54:
Intended Use For surface-mount appl
Page 55 and 56:
Intended Use For undercabinet appli
Page 57 and 58:
Intended Use For closets, utility r
Page 59 and 60:
Intended Use For multi-purpose area
Page 61 and 62:
Intended Use For applications where
Page 63 and 64:
Intended Use Provides good general
Page 65 and 66:
Intended Use Intended for use in re
Page 67 and 68:
Intended Use Use in surface or susp
Page 69 and 70:
Intended Use For applications that
Page 71 and 72:
Heavy-Duty Channels Intended Use Us
Page 73 and 74:
Intended Use Ideal for displays or
Page 75 and 76:
Intended Use Use for applications r
Page 77 and 78:
Intended Use For mounting heights u
Page 79 and 80:
Intended Use For mounting heights u
Page 81 and 82:
Intended Use Intended for mounting
Page 83 and 84:
Intended Use For low to medium moun
Page 85 and 86:
Intended Use For low to medium moun
Page 87 and 88:
Intended Use Suitable for use in co
Page 89 and 90:
Intended Use Suitable for use in co
Page 91 and 92:
Intended Use Suitable for use in IS
Page 93 and 94:
Troffer Options Listed below are th
Page 95 and 96:
PC1 Injection-molded parabolic poly
Page 97 and 98:
Labor-Saving Tandem Option Simply w
Page 99 and 100:
Electrical, Hanging and Miscellaneo
Page 101 and 102:
ELECTRICAL Electrical, Hanging and
Page 103 and 104:
PW - Prewiring Option (Troffers onl
Page 105 and 106:
Wireguards (Order separately) 14-ga
Page 107 and 108:
Staggered Strips are offset at both
Page 109 and 110:
www.SpecLightSolutions.com CONTENTS
Page 111 and 112:
Intended Use Unibody industrial for
Page 113 and 114:
Intended Use High-performance premi
Page 115 and 116:
Intended Use Provides efficient ill
Page 117 and 118:
Intended Use Delivers maximum effic
Page 119 and 120:
www.peerless-lighting.com Peerless
Page 121 and 122:
www.peerless-lighting.com Peerless
Page 123 and 124:
www.peerlite.com CONTENTS Cerra ®
Page 125 and 126:
Intended Use The Cerra 10 Series fe
Page 127 and 128:
Intended Use With a clean architect
Page 129 and 130:
Intended Use Cerra baffle wall uses
Page 131 and 132:
Intended Use With a clean crescent
Page 133 and 134:
Intended Use The Enzo Series comple
Page 135 and 136:
Intended Use The Prima I/D provides
Page 137 and 138:
Installation Guide All Peerless and
Page 139 and 140:
www.lithonia.com CONTENTS Ceiling M
Page 141 and 142:
Intended Use Innovative platform th
Page 143 and 144:
Intended Use Provides general illum
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Intended Use Suitable for use in re
Page 157 and 158:
Intended Use Ideal for use as accen
Page 159 and 160:
Intended Use Ideal for use as accen
Page 161 and 162:
Intended Use Suitable for accent li
Page 163 and 164:
Intended Use Suitable for accent li
Page 165 and 166:
Surface-Mounted Fixtures Designatio
Page 167 and 168:
Vanity Wall Brackets Molded Acrylic
Page 169 and 170:
www.gothamlighting.com Gotham / PSG
Page 171 and 172:
www.gothamlighting.com CONTENTS Com
Page 173 and 174:
Intended Use For general downlight
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Intended Use For downlight applicat
Page 183 and 184:
Intended Use For downlight wallwash
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Intended Use Decorative luminaire d
Page 191 and 192:
Intended Use High-performance decor
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Intended Use Provides uniform gener
Page 199 and 200:
Intended Use For retail areas or an
Page 201 and 202:
Page 203 and 204:
Intended Use A small-aperture quart
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Intended Use Provides uniform gener
Page 211 and 212:
Intended Use For retail areas or an
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Intended Use Provides direct and in
Page 219 and 220:
Intended Use Suitable for offices,
Page 221 and 222:
Intended Use Suitable for offices,
Page 223 and 224:
MR16 MR11 Wattage Distribution (deg
Page 225 and 226:
NOTES: 1 Available with 4pin lamp o
Page 227 and 228:
SC Sloped Ceiling Adaptor, aluminum
Page 229 and 230:
www.lithonia.com CONTENTS Fluoresce
Page 231 and 232:
F8O2 White F8O2A Clear Diffuse* F8O
Page 233 and 234:
Non-IC Rated Full Reflectors - All
Page 235 and 236:
IC Horizontal Lamp Housing IC-Rated
Page 237 and 238:
Non-IC Frame-In Non-IC Rated Full R
Page 239 and 240:
Non-IC-Rated Full Reflectors - All
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Non-IC Rated - These steplights can
Page 247 and 248:
Remodeler Clips ARC144 Box of 144 l
Page 249 and 250:
www.lithonia.com CONTENTS Incandesc
Page 251 and 252:
Premium Trims Open Reflector 6O2 Wh
Page 253 and 254:
Incandescent Recessed Non-IC-Rated
Page 255 and 256:
Incandescent Recessed Non-IC-Rated
Page 257 and 258:
Baffled Wallwash 6W2 Black 6W2W Whi
Page 259 and 260:
IC-Rated Full Reflector Trims - All
Page 261 and 262:
IC-Rated Full Reflector Trims - All
Page 263 and 264:
IC/Non-IC-Rated Full Reflectors - A
Page 265 and 266:
Trims - These trims are for Non-IC
Page 267 and 268:
Non-IC-Rated Trims - All trims are
Page 269 and 270:
Standard Trims Open Narrow Flange 7
Page 271 and 272:
Incandescent Steplights SL1 White S
Page 273 and 274:
CSA CSA CSA Certified MVOLT MVOLT E
Page 275 and 276:
Determining the proper placement of
Page 277 and 278:
www.lithonia.com CONTENTS LTD Serie
Page 279 and 280:
Ordering Information Example: LTD C
Page 281 and 282:
Ordering Information Example: LTC F
Page 283 and 284:
Ordering Information Example: LTC G
Page 285 and 286:
Ordering Information Example: LTC G
Page 287 and 288:
8-1/4 (20.9) 11-7/8 (30.2) 10-3/4 (
Page 289 and 290:
Ordering Information Example: LTC L
Page 291 and 292:
Roundback and Flatback Cylinders Or
Page 293 and 294:
Intended Use One- or two-circuit tr
Page 295 and 296:
Live End Feed Feed Connector used t
Page 297 and 298:
Louver Baffle Blades Provides later
Page 299 and 300:
www.lithonia.com CONTENTS Exit Sign
Page 301 and 302:
Intended Use Suitable for applicati
Page 303 and 304:
Family LV LED V Incandescent Vandal
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Stem Kits 1 Wireguards 2 ELA US12 S
Page 311 and 312:
Contemporary Thermoplastic Emergenc
Page 313 and 314:
Length: 10-5/16 (262) Width: 10-5/1
Page 315 and 316:
Family 6 Volts IND616 16W IND636 36
Page 317 and 318:
Intended Use Provides a minimum of
Page 319 and 320:
Intended Use Suitable for use in Cl
Page 321 and 322:
Ordering Information - Lamp heads o
Page 323 and 324:
Vandal Shield ELA VS2 ELA VS Mounti
Page 325 and 326:
Fluorescent Battery Packs, Downligh
Page 327 and 328:
2GT8 2U316 A12 Power Sentry ® Gene
Page 329 and 330:
General Spacing Guidelines for Indu
Page 331 and 332:
Intended Use An off-line AC power s
Page 333 and 334:
Exit Signs Precise ® LED Chevron D
Page 335 and 336:
Exit Signs Extruded Aluminum LED 33
Page 337 and 338:
Exit Signs Quantum ® LED Quick-Mou
Page 339 and 340: Exit Signs Titan ® Family LX LED e
Page 341 and 342: Options and Compatability AVAILABLE
Page 343 and 344: Emergency Lighting Units Titan M6,
Page 345 and 346: Emergency Lighting Units Remote Lam
Page 347 and 348: Performance Data Evaluating Perform
Page 349 and 350: Performance Data Evaluating Perform
Page 351 and 352: Photometrics Indura Composite Lamp
Page 353 and 354: Photometrics IND N3512S IND N5012S
Page 355 and 356: Indoor HID Lithonia Lighting offers
Page 357 and 358: Ballast Housings 354 TH Ballast Hou
Page 359 and 360: Ballast Housings NEW NEW NEW 356 SH
Page 361 and 362: High Bay TPGE DuraBay Series Watta
Page 363 and 364: High Bay TPGE DuraBay 360 PG16AGLE
Page 365 and 366: High Bay THR Acrylume 362 PA22 Ind
Page 367 and 368: High Bay SH PA22 Acrylume NEW Orde
Page 369 and 370: High Bay THV Hi-Tek ® 366 A14 Indo
Page 371 and 372: High Bay THP Hi-Tek ® Ordering Inf
Page 373 and 374: High Bay SH A16 Hi-Tek ® NEW Order
Page 375 and 376: High Bay SH A15 Hi-Tek ® NEW Order
Page 377 and 378: Low Bay TXR Acrylume Ordering Info
Page 379 and 380: Low Bay TXF Acrylume and Hi-Tek ®
Page 381 and 382: Low Bay TXL TXP Hi-Tek ® 378 A20 T
Page 383 and 384: Low Bay TXC Hi-Tek ® 380 A23 TXC A
Page 385 and 386: Low Bay TGL TGR 382 TGR Indoor HID
Page 387 and 388: Dock Lights DSA FSSA Intended Use I
Page 389: Industrial Control System KiloWatch
Page 393 and 394: Options Options and and and Accesso
Page 399 and 400: Options Options and and Accessories
Page 403 and 404: Options and Accessories Ordering an
Page 405 and 406: General Area Lighting GP Parabolic
Page 407 and 408: General Area Lighting GC Lensed Ref
Page 409 and 410: Rough Service Lithonia Lighting off
Page 411 and 412: Architectural VGR Gateway NEW Orde
Page 413 and 414: Architectural VGO Gateway NEW Orde
Page 415 and 416: Utilitarian VR1 VR2 VR1 412 Rough S
Page 417 and 418: Utilitarian VR1B VR2B VR1BV Series
Page 419 and 420: Utilitarian VR3C VR4C VR4CV VR4C VR
Page 421 and 422: Utilitarian VRR Ordering Informatio
Page 423 and 424: Linear Fluorescent VSL VSLC Series
Page 425 and 426: Linear Fluorescent VRS Ordering Inf
Page 427 and 428: Linear Fluorescent VRI 424 Rough Se
Page 429 and 430: Outdoor Lithonia Lighting outdoor p
Page 431 and 432: Area Lighting Aeris Ordering Infor
Page 433 and 434: Area Lighting KSF Spec-Form ® 430
Page 435 and 436: Area Lighting KAC Contour ® 432 De
Page 437 and 438: Area Lighting KVF Designation Distr
Page 439 and 440: Area Lighting KVE Designation High
Page 441 and 442:
Area Lighting KAR 438 Outdoor / PSG
Page 443 and 444:
Area Lighting KKS Ordering Informat
Page 445 and 446:
Security Lighting TDD 442 Designati
Page 447 and 448:
Roadway Lighting CHE NEW Ordering I
Page 449 and 450:
Roadway Lighting CHM CHMD NEW Order
Page 451 and 452:
Site Lighting KBS KBE 448 KBE - Dec
Page 453 and 454:
Site Lighting KBC KBR KBC - Decorat
Page 455 and 456:
Site Lighting TPA NEW 452 Outdoor /
Page 457 and 458:
Floodlighting KFL Ordering Informat
Page 459 and 460:
Floodlighting TFL Contour ® VERTIC
Page 461 and 462:
Floodlighting TFM Contour ® Orderi
Page 463 and 464:
Floodlighting TQ/TQE 460 TQ1500 D W
Page 465 and 466:
Floodlighting HFA 462 Outdoor / PSG
Page 467 and 468:
Floodlighting HFR Ordering Informat
Page 469 and 470:
Floodlighting 95 Ordering Informati
Page 471 and 472:
Floodlighting 170S 468 Shown with T
Page 473 and 474:
Sportslighting TV 470 Designation H
Page 475 and 476:
Building Mounted WFL 472 Designatio
Page 477 and 478:
Building Mounted TWR NEW 474 W W TW
Page 479 and 480:
Building Mounted TWA Contour ® 476
Page 481 and 482:
Building Mounted TWL Accessories (O
Page 483 and 484:
Building Mounted WG/WP 480 Outdoor
Page 485 and 486:
Parking Garage KPS 482 Outdoor / PS
Page 487 and 488:
Options and Accessories C22 12-3 SE
Page 489 and 490:
Options and Accessories Area Lighti
Page 491 and 492:
Options and Accessories Site Lighti
Page 493 and 494:
Options and Accessories ■ = Avail
Page 495 and 496:
Floodlighting Design Guidelines IES
Page 497 and 498:
General Information — Poles (Pole
Page 499 and 500:
Anchor Base Poles RSA Features Shaf
Page 501 and 502:
Anchor Base Poles RSAH Features Sha
Page 503 and 504:
Anchor Base Poles SSAH Features Sha
Page 505 and 506:
Anchor Base Poles RTS Features Shaf
Page 507 and 508:
Anchor Base Poles STS Features Shaf
Page 509 and 510:
Anchor Base Poles SPRTS Features Sh
Page 511 and 512:
SPRTS Options 3" Sched 40 pipe 508
Page 513 and 514:
Pole Options The orientation from t
Page 515 and 516:
Pole Options Projected area is for
Page 517 and 518:
Direct Burial Poles RTFDB Ordering
Page 519 and 520:
Anchor Base Poles RTCD NEW Ordering
Page 521 and 522:
Direct Burial Poles STC Features Sh
Page 523 and 524:
SPRTC Crossarm Options Angle Iron C
Page 525 and 526:
Antique Street Lamps has developed
Page 527 and 528:
524 Antique Street Lamps has the la
Page 529 and 530:
ANTIQUE Street Lamps Product Overvi
Page 531 and 532:
Rapid-Ship Rapid-Ship Luminaires Or
Page 533 and 534:
Eurotique EUROTIQUE ® Luminaires N
Page 535 and 536:
Eurotique EUROTIQUE ® Arms and Wal
Page 537 and 538:
Hydrel is the industry’s premier
Page 539 and 540:
Underwater lighting is synonymous w
Page 541 and 542:
Hydrel’s M9000 Ingrade Series is
Page 543 and 544:
Hydrel’s reputation is one of sup
Page 545 and 546:
Control Systems Lithonia Lighting p
Page 547 and 548:
Control Systems ® Synergy 544 Cont
Page 549 and 550:
Control Systems ® Synergy Ordering
Page 551 and 552:
Control Systems ® Synergy Panel Si
Page 553 and 554:
User Interfaces ® Synergy 550 Cont
Page 555 and 556:
User Interfaces LVMS Ordering Infor
Page 557 and 558:
Switching SwitchPak TM NEW 554 Cont
Page 559 and 560:
Sensing DEQ APS 556 Control Systems
Page 561 and 562:
Sensing Litronic ® 558 Control Sys
Page 563 and 564:
Dimming Sequel ® 560 Series SQIDC
Page 565 and 566:
Dimming ISD 562 Control Systems / P
Page 567 and 568:
Dimming DSD 564 Series DSD Capacity
Page 569 and 570:
Dimming SLS SLA FP 566 Control Syst
Page 571 and 572:
RELOC Wiring Systems RELOC, the lea
Page 573 and 574:
Commercial Systems Quick-Flex 570
Page 575 and 576:
Commercial Systems Quick-Flex QSFC
Page 577 and 578:
Commercial Systems Quick-Flex 574
Page 579 and 580:
Industrial Systems OnePass Patente
Page 581 and 582:
Industrial Systems OSS Splitter Spl
Page 583 and 584:
Industrial Industrial Systems Syste
Page 585 and 586:
Specialty Systems Power Wiring 582
Page 587 and 588:
Specialty Systems Specialty Lightin
Page 589 and 590:
Access Floor Wiring DB Ordering Inf
Page 591 and 592:
Ballast Characteristics All electri
Page 593 and 594:
Linear Fluorescent Generic Electron
Page 595 and 596:
Linear Fluorescent Type of Type of
Page 597 and 598:
Compact Fluorescent Electronic Ball
Page 599 and 600:
High Intensity Discharge Metal Hali
Page 601 and 602:
High Intensity Discharge Ballast Da
Page 603 and 604:
High Intensity Discharge Ballast Da
Page 605 and 606:
High Intensity Discharge Ballast Ty
Page 607 and 608:
604 Technical Technical / / PSG8 PS
Page 609 and 610:
Design Considerations LUMINAIRE CLA
Page 611 and 612:
Design Considerations Lighting Calc
Page 613 and 614:
Special Environments The IEC (Inter
Page 615 and 616:
Special Environments A cleanroom is
Page 617 and 618:
TERMS: All Lithonia Lighting Canada
Page 619 and 620:
Index Cylinders, compact fluorescen
Page 621 and 622:
Index LTC track lighting ..........
Page 623 and 624:
Index TCF floodlighting ...........
show all

Sections

Create successful ePaper yourself

Delete template?

Save as template?