Sections

Emergency Lighting Units
LZ – Class I, Div. 2
Exit & Combo
LZ
11.2"
(284)
13.2"
(335)
316 Emergency / PSG8
6.6"
(168)
Hazardous Location Emergency Exit and Combo
Ordering Information Example: LZ S 1 R 120/277 EL N SD
Family
LZ LED
hazardous
exit
NOTES:
1 Other voltages and frequencies available;
consult factory.
Ordering Information Example: LHZ S 1 R 120/277 R1 SD
Family
LHZ
LHZ 1 6V, 6W
lead-calcium
battery 1
LHZ612 6V, 12W
lead-calcium
battery
LHZ624 6V, 24W
lead-calcium
battery
LHZ660 6V, 60W leadcalcium
battery
Face type
S Stencil
Face type
S Stencil
Housing
color
(blank) Gray
Housing color
(blank) Gray
No. of faces
1 Single
No. of faces
1 Single
Dimensions are shown in inches (millimeters) unless otherwise noted.
Intended Use
Combo and EL N exit provide 90 minutes
of operation for the rated wattage upon
loss of AC power. Both are designed for
Class I, Division 2 environments.
Features
Impact-resistant, fiberglass reinforced
polyester housing. Gray with stainless
steel hardware and clear polycarbonate
cover. Includes one-piece formed gasket
and corrosion resistant hardware. Standard
internal or external mounting feet for
installation flexibility.
Housing suitable for NEMA 4, 4X, 12 and
13 areas; Class I, Division 2, Groups A, B, C
& D, Zone 2, Groups IIA, IIB + H2 & IIC and
Class II, Division 2, Groups F & G.
LED color
R Red
G Green
ELECTRICAL (EXIT)
Input power requirements at 120V AC
(red and green): AC only = 9.5W,
emergency operation = 11W, .90 power
factor.
ELECTRICAL (COMBO)
Input power requirements at 120V AC:
red = 25.2W max., green = 25.2W max.
LED
color
R Red
G Green
Voltage 2
120/277 Dual
voltage
Input
voltage 1
120/277 Dualvoltage
Lamp heads 1
(blank) 2 heads
R1 1 head
RO No heads
www.lithonia.com
keywords: LZ and LHZ
Lamp heads are Class I, Div. 2 rated polycarbonate
sealed beam PAR36 tungsten
or halogen lamps. 6W halogen lamps
standard.
Optional shatter-resistant shield is designed
for use in food service areas.
Non-diffuse LEDs provide maximum face
illumination.
LED life exceeds 25 years based on continuous
operation.
Listings – UL Listed.
Operation
(blank) Nonemergency
EL N Nickelcadmium
battery
Lamp type
PAR36 sealed beam
(blank) 6W/6V halogen
N0806 8W/6V incand.
N1806 18W/6V incand.
N2506 25W/6V incand.
N3006 30W/6V incand.
H0806 8W/6V halogen
H1206 12W/6V halogen
SD
Options
Self-diagnostics
SDA Self-diagnostics
with alarm
TD1 Time delay 120 VAC
TD2 Time delay 277 VAC
Options 3
SD Self-diagnostics
SDA Self-diagnostics with
alarm
TD1 Time delay 120 VAC
TD2 Time delay 277 VAC
SRS Shatter-resistant
lamp head shield
NOTES:
1 LHZ has 6W total capacity. Will be shipped with one 6W
lamp head unless R0 option is selected.
2 Other voltages and frequencies available. Consult factory.
3 Some option configurations may impact UL listing. Consult
factory for details.