Sections

Linear Fluorescent
VSL
VSLC
Series
VSL 9 1�4" wide
VSLC 5 3 �8" wide
No. of lamps
1, 2 2, 3
Not included.
VSL
420 Rough Service / PSG8
1
VSL
VSLC
Lamp type
17 17W T8 (24") 3
20 20W TS T12 (24")
32 32W T8 (48") 3
40 40W T12 (48")
17 17W T8 (24") 3
20 20W TS T12 (24")
32 32W T8 (48") 3
40 40W T12 (48")
Intended Use
For areas that require higher levels of protection
from physical assault or environmental
elements, while providing proper
illumination for safety and security.
Features
Housing – Heavy-duty 16-gauge coldrolled
steel, one-piece housing for durability
and security.
Ballast Cover – Ballast and lampholders are
installed to wireway cover to provide easy
installation and service. Wireway cover
safety chains included.
Socket – Medium bi-pin, highly heat resistant,
with internal locking collar for positive
lamp retention and resistance to impact
and vibration.
Finish – Five-stage iron-phosphate pretreatment
ensures superior paint adhesion
and rust resistance. Painted parts finished
with high-gloss, baked white enamel.
Ordering Information Example: VSL 2 32 120 NLCF
VSLC
Surface Enclosed
Lens type
(blank) Solid-end
lens
SCE Surface
conduit
entry lens4 Availability and Dimensions
Lamps per Lamp Width Depth Length
Series fixture type in. (cm) in. (cm) in. (cm)
VSL
2
17, 20
32, 40
9¹�₄" (23.5)
9¹�₄" (23.5)
3³�₈" (8.6)
3³�₈" (8.6)
25³�₈" (64.5)
49³�₈" (125.4)
3 32 9¹�₄" (23.5) 3³�₈" (8.6) 49³�₈" (125.4)
VSLC 1
17, 20 5³�₈" (13.7) 4¹�₂" (11.4) 25³�₄" (65.4)
32, 40 5³�₈" (13.7) 4¹�₂" (11.4) 49³�₄" (126.4)
Voltage
120
277
347
MVOLT5 Accessories (Order separately)
RK1 T20BIT Torx TX20 hex-base driver bit for
tamper-resistant screws with center
reject pin.
RK1 T20DRV Torx TX20 screwdriver for tamperresistant
screws with center reject
pin.
SCG Surface conduit gasket (one pair,
not installed)
www.lithonia.com
keyword: VSL
Lens – Clear prismatic, injection-molded
and UV-stabilized polycarbonate lens
(.130" thick) that completely encloses
face and all sides of housing. No exposed
metal surfaces. Optional lens
(SCE) features easily removable moldedin
lens membrane centered over end
plate knockouts for surface conduit and
wiring access. Includes gaskets (one
pair, not installed). Lens is secured to
housing with tamper-resistant Torx ® T-20
screws with center reject pin (included).
Gasket – One-piece, closed cell neoprene
pad mounting gasket is factory installed
to help seal against moisture, dust
and insects.
Ballast – Ballast for T8 lamps is electronic
with 0°F starting temperature. Class P, HPF
ballast is standard for T12 lamps.
Listings – UL Listed to US and Canadian
safety standards. CSA Certified (see Options).
UL listed for 25°C ambient and wet
locations.
DL
Options
Damp location
ELDW Emergency battery pack (300 lumens) 2,6,7
EL5DW Emergency battery pack (500 lumens) 2,6,7
EL6DW Emergency battery pack (600 lumens) 2,6,7
EL14DW Emergency battery pack (1400 lumens) 2,6,7
GEB Electronic ballasts, < 20% THD
GEB10IS Instant start electronic ballast < 10% THD
GEB10RS Rapid start electronic ballast < 10% THD8 GLR Internal fast-blow fusing8 GMF Internal slow-blow fusing8 NLCF Compact fluorescent night-light (9W
max.) 8,9,10,11
RIF1 Radio interference filter, one per fixture12 CSA Listed and labeled to comply with
Canadian Standards
NOTES:
1 3-lamp model available in 32W T8 only.
2 Available in 4-foot fixtures only.
3 Requires GEB, GEB10IS, or GEB10RS option.
4 Provided with one pair of surface conduit gaskets.
5 Electronic ballast 120-277V only. Must specify GEB10IS.
6 Luminaires ordered with ELDW option (Example: EL5DW)
will bear UL Emergency Lighting Equipment label for
damp or wet location, depending on fixture.
7 Canada: order as CEL, CEL6 and CEL11. Dry location listing
only.
8 Not available with MVOLT.
9 Not available in 3-lamp model.
10 Lamp by others.
11 Available with VSL only.
12 For one filter per ballast, specify RIF2.