Sections

Linear Fluorescent
Generic Electronic Ballast Option
Lithonia Lighting maintains in its
distribution centers and selected field
warehouses the industry’s largest and
broadest inventory of luminaires with
popular electronic ballasts. If ballast
quality, performance and availability are
a concern, but you have no vendor
preference, specify Lithonia's generic
electronic ballast option. This ensures
you an electronic ballast that meets or
exceeds ANSI standards for highfrequency
electronic ballasts. Ballasts are
from nationally-recognized manufacturers
with established warranty and service
programs.
GEB/GEB10_ Specifications
UL Listed. CSA Certified. Thermally protected
Class P, non-PCB ballast.
Minimum line transient as shown in
IEE587, Category A and ANSI-62.41.
Ballast circuit type: instant or rapid start,
series or parallel wired.
Ballast operation: 120V nominal (108V-
132V) 60Hz, 277V nominal (249V-305V) 60
To order, add designation to fixture catalog number. Example: 2SP8 G 3 32 A12 MVOLT 1/3 GEB10IS
GEB10IS
only
GEB and
GEB only GEB10PS
GEB and GEB10RS
GEB10IS
Voltage
120, 277,
347, MVOLT1 GEB/GEB10_ Performance
Configuration
(blank) Standard
(see box at lower right)
1/3 One 3-lamp ballast
1/4 One 4-lamp ballast
Specify GEB for ballasts with less than
20%THD. Specify GEB10IS, GEB10RS and
GEB10PS for ballasts with less than
10%THD. Multi-volt option (MVOLT)
currently is available in less than 10% THD
ballasts only. GEB10IS is standard MVOLT.
GEB
Type