Sections

Anchor Base Poles
RTS
Features
Shaft – Minimum weldable-grade (ASTM
A-595 Grade A), hot-rolled, commercialquality
carbon steel tubing with minimum
yield of 55,000 psi. Uniform wall
thickness of 11-gauge (0.1196") or 7gauge
(0.1793"). Shafts are constructed
with full-length, longitudinal, high-frequency
resistance welds. Round in
cross-section, having uniform taper of
approximately .14" per foot.
Anchor Base – Fabricated from hotrolled
carbon steel plate that conforms
to ASTM A36.
Ordering Information: See page 494
(Note: Poles are available only in U.S.)
INSTALLATION NOTES:
Installation requires grout to be packed under base to ensure
full contact with foundation. Factory-supplied templates must
be used when setting anchor bolts. Lithonia Lighting will not
accept claim for incorrect anchorage placement due to failure
to use Lithonia Lighting factory templates.
Do not erect poles without having fixtures installed.
If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.
NOTES:
1 Mounting Arrangement: (PT) Open Top; (T20) 2 3 /8" OD
(2" NPS)
2 Drill Mounting: (DM19) 1 fixture at 90°; (DM28) 2
fixtures at 180°
3 Options: See page 509.
4 Brackets: See page 512.
502 Outdoor / PSG8
C
A
B
18"
Round Tapered Steel
Hand hole – Rectangular, reinforced handhole
rim having nominal dimensions of 3"x5"
for shafts less than 6.25" base diameter and
4"x6.5" for all other shafts. Steel cover with
attachment screws included. Hand hole is
located 18" above base.
Grounding – Nut holder located immediately
inside hand-hole rim is tapped for
½" – 13 UNC ground bolt and nut (provided
by others).
Anchor Bolts – Fabricated from commercial-quality
hot-rolled carbon steel with
minimum yield strength of 55,000 psi. Bolts
have an "L" bend on one end.
Technical Information
EPA (ft 2 ) with 1.3 gust
Hardware – Fasteners are high-strength
galvanized zinc-plated or stainless steel.
Top Cap – Weatherproof removable top
cap provided with all drill-mount poles.
Finish – Dark bronze polyester powder finish
(DDB) standard; other architectural colors
available.
Base Cover – Full-base cover standard.
Nom. Pole Wall Bolt Bolt Approx.
Catalog mount. shaft size thick. 80 Max. 90 Max. 100 Max. circle size ship wt.
number ht. (ft.) (in. x in. x ft.) (in.) Gauge mph wt. mph wt. mph wt. (in.) (in. x in. x in.) (lbs.)
RTS 20 5-9B 20 5.9 x 3.1 x 20 0.125 11 19.3 482 15.1 377 12.2 305 9.0 1 x 36 x 4 140
RTS 20 6-5B 20 6.5 x 3.7 x 20 0.125 11 24.2 605 19.3 482 15.6 390 9.5 1 x 36 x 4 160
RTS 25 5-9B 25 5.9 x 2.4 x 25 0.125 11 12.5 312 9.9 247 8 200 9.0 1 x 36 x 4 155
RTS 25 7-0B 25 7.0 x 3.5 x 25 0.125 11 20.3 507 16.2 405 13.1 327 10.0 1 x 36 x 4 200
RTS 25 7-0F 25 7.0 x 3.5 x 25 0.188 7 28.5 713 22.5 563 18.2 455 10.0 1 x 36 x 4 280
RTS 30 6-6B 30 6.6 x 2.4 x 30 0.125 11 11.7 292 9.3 232 7.5 187 9.5 1 x 36 x 4 200
RTS 30 8-0B 30 8.0 x 3.8 x 30 0.125 11 18.9 473 14.9 373 12 300 11.0 1 x 36 x 4 265
RTS 30 8-0F 30 8.0 x 3.8 x 30 0.188 7 27.5 550 21.6 542 17.5 439 11.0 1-1/4 x 42 x 6 380
RTS 35 7-3B 35 7.3 x 2.4 x 35 0.125 11 11.2 280 8.9 222 7.1 177 10.5 1 x 36 x 4 250
RTS 35 8-5B 35 8.5 x 3.6 x 35 0.125 11 18.9 472 15.1 377 12.2 305 11.5 1 x 36 x 4 315
RTS 35 9-5B 35 9.5 x 4.6 x 35 0.125 11 23.2 580 18.2 455 14.5 363 13.0 1 x 36 x 4 370
RTS 39 7-8B 39 7.8 x 2.4 x 39 0.125 11 10.7 267 8.5 212 6.6 165 11.0 1 x 36 x 4 285
RTS 39 9-0B 39 9.0 x 3.6 x 39 0.125 11 17.2 430 13.5 338 10.8 270 12.5 1 x 36 x 4 355
RTS 39 9-0F 39 9.0 x 3.6 x 39 0.188 7 26.1 654 20.6 517 16.7 419 12.5 1-1/4 x 42 x 6 515
RTS 45 10-0B 45 10.0 x 3.7 x 45 0.125 11 17.4 435 13.5 338 10.6 265 13.5 1 x 36 x 4 450
RTS 45 10-0F 45 10.0 x 3.7 x 45 0.188 7 25.5 639 20.2 505 16.3 409 13.5 1-1/4 x 42 x 6 650
RTS 50 10-0B 50 10.0 x 3.0 x 50 0.125 11 13.2 330 10.6 265 8.3 208 13.5 1 x 36 x 4 475
RTS 50 10-0F 50 10.0 x 3.0 x 50 0.188 7 20.5 512 16.5 412 13.6 340 13.5 1-1/4 x 42 x 6 680
Pole Data
Shaft Bolt Bolt Base Anchor Warehouse Template
base circle projection square bolt anchor bolt number
size A B C description description
5.9" B 9" 3 1/2"-4 1/4" 10" ABRTS-5-9B AB36-0 PJ50075
6.5" B 9.5" 3 1/2"-4 1/4" 10 1/2" ABRTS-6-5B AB36-0 PJ50074
7.0" B 10" 3 1/2"-4 1/4" 10 7/8" ABRTS-7-0B AB36-0 PJ50077
7.0" F 10" 3 3 /4"-4 1 /2" 10 7 /8" ABRTS-7-0F AB36-0 PJ50076
6.6" B 9.5" 3 1 /2"-4 1 /4" 10 1 /2" ABRTS-6-6B AB36-0 PJ50078
8.0" B 11" 3 1/2"-4 1/4" 11 1/2" ABRTS-8-0B AB36-0 PJ50079
8.0" F 11" 4 1/2"-5 1/4" 11 1/2" ABRTS-8-0F N/A PJ50080
7.3" B 10.5" 3 1/2"-4 1/4" 11 1/4" ABRTS-7-3B AB36-0 PJ50081
8.5" B 11.5" 3 3/4"-4 1/2" 12" ABRTS-8-5B AB36-0 PJ50082
9.5" B 13" 3 3 /4"-4 1 /2" 13" ABRTS-9-5B AB36-0 PJ50083
7.8" B 11" 3 3 /4"-4 1 /2" 11 1 /2" ABRTS-7-8B AB36-0 PJ50084
9.0" B 12.5" 3 3/4"-4 1/2" 12 3/8" ABRTS-9-0B AB36-0 PJ50085
9.0" F 12.5" 4 1/2"-5 1/4" 12 3/8" ABRTS-9-0F N/A PJ50086
10.0" B 13.5" 3 3/4"-4 1/2" 14" ABRTS-10-B AB36-0 PJ50087
10.0" F 13.5" 4 1/2"-5 1/4" 14" ABRTS-10-F N/A PJ50088
www.lithonia.com
keyword: RTS