Single pull macgregor type hatch cover.pdf - Cochin University of ...
Single pull macgregor type hatch cover.pdf - Cochin University of ...
Single pull macgregor type hatch cover.pdf - Cochin University of ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Number <strong>of</strong> coaming <strong>hatch</strong> stay in end coaming: 3<br />
Number <strong>of</strong> coaming <strong>hatch</strong> stay inside coaming: 4<br />
Support for coaming (inside): 7.6×7.6 cm square<br />
Number <strong>of</strong> supports in end coaming (inside): 3<br />
Number <strong>of</strong> support in side coaming (inside): 4<br />
Thickness <strong>of</strong> the support: 2cm<br />
Length between supports: 20cm<br />
Thickness <strong>of</strong> rubber gasket: 1cm<br />
5.1.4 Hatch Cover Design<br />
The model consists <strong>of</strong> four Pantoons whose design was taken from the ship Pantoons<br />
design.<br />
Length: 58cm<br />
Width: 23cm<br />
Thickness at middle: 3cm<br />
Thickness at edge: 2cm<br />
Figure 5.5: Hatch Cover Design<br />
Source: Team<br />
58