SERVICE MANUAL - SONYRUS

DSC-W1/W12
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1: The automatic Adjustment Program does not support the “Initialization of data”. Perform it manually.
Note 2: Use the Color Shading Adjustment Program (W1P100ColorShade.exe) when performing “Color Shading Adjustment” of
Camera System Adjustment.
Adjusting item Adjustment LCD unit
Lens block
Block
Replaced parts
Mounted parts Board Flash memory
replacement replacement replacement replacement
(Note 1) Initialization of data z z
VIDEO adjustment Video output level adj. z z z z
CAMERA adjustment 1 Flange back adj. z z z z z
CAMERA adjustment 2 Flange back check z z z z z
(Note 2) Color shading adj. z z z z z z z
CAMERA adjustment 3
F No. compensation
Mechanical shutter adj.
Light value adj.
AWB 3200K standard data input
AWB 5800K standard data input
AWB 5800K check
AWB 3200K check
CCD linearity check
Color reproduction adj.
CCD white defect compensation check
CCD black defect compensation check
z
z
CAMERA adjustment 4
Strobe adj.
Auto focus illumination check
LCD initial data input
VCO adj.
z z z
LCD adjustment Contrast adj.
V-COM adj.
White Balance adj.
z z
Flash unit
Table 6-1-1
LCD901
LCD block
6-2
Back light unit
D901
LCD block
(CCD imager)
IC101
CD-507 board
(AF illumination LED)
D101
CD-507 board
z
(Timing gen., CCD signal process)
IC101
CH-146 board
(Camera DSP)
IC301
SY-102 board
(Video amp.)
IC302
SY-102 board
(LCD driver)
IC801
MS-204 board
(COMPLETE)
CD-507 board
z
(COMPLETE)
CH-146 board
z z z
z
z
z
(COMPLETE)
MS-205 board
z z
(COMPLETE)
SY-102 board
(Camera system control)
(With built-in flash memory)
IC501
SY-102 board
z z
z z
z z