SERVICE MANUAL - SONYRUS

10) Click the [OK] button, and “11. Color Reproduction Adj.” will
be executed. The following messages are displayed in order,
and then operate the vectorscope to make a check with the
color reproduction frame in accordance with the message.
Fig. 6-1-35
11) Upon successful completion of “11. Color Reproduction Adj.”,
the following message is displayed. Change the chart in accordance
with the message.
Fig. 6-1-36
12) Click the [OK] button, and the “12. CCD White Defect Compensation
Check”, “13. CCD Black Defect Compensation
Check” and “14. Release of Data Setting during Camera Adj.”
will be executed.
13) Upon successful completion of all items of the CAMERA
Adjustment 3, the following message is displayed. Click the
[OK] button.
Fig. 6-1-37
6-19
Check on the vectorscope
YE
G
Burst Position
R
R-Y
W
M G
Fig. 6-1-38
CY
DSC-W1/W12
B
B-Y