SERVICE MANUAL - SONYRUS
SERVICE MANUAL - SONYRUS
SERVICE MANUAL - SONYRUS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1-2-2. Color Shading Adjustment Program<br />
1. Application Environment<br />
OS: Windows 98/98SE/Me/2000/XP<br />
RAM: 256MB or more recommended<br />
USB: 2.0 recommended (also compatible with 1.1)<br />
Two connectors are required.<br />
2. Installation Method<br />
Extract the file compressed in the ZIP format (W1P100Color<br />
Shade.zip). Execute the extracted file (setup.exe), and the installer<br />
will start. Install the program following the instructions given on<br />
the installer screen.<br />
3. Notes When Using the Color Shading Adjustment<br />
Program<br />
1) The SEUS must be installed in the PC.<br />
2) The HASP Key for SEUS must be connected to the USB connector.<br />
The program will not start unless the HASP Key is<br />
connected.<br />
4. Starting Method of Color Shading Adjustment<br />
Program<br />
Click the [Start] button on the task bar, and click the [DSC-W1,<br />
P100 Color Shade Adjustment] from the [Programs], and the<br />
program will start.<br />
6-9<br />
DSC-W1/W12<br />
5. Screen and Function of Each Button of Color<br />
Shading Adjustment Program<br />
A<br />
1<br />
Fig. 6-1-9<br />
1 Model Select radio button<br />
Selects the model to be adjusted.<br />
2 [Connect] button<br />
Makes connection to the camera and switches the camera to<br />
the adjustment mode. In the case of successful connection to<br />
the camera, the indication at the part A changes to “Connected”<br />
and the [Color Shading Adjustment] button and the [Disconnect]<br />
button become active.<br />
2<br />
3<br />
4<br />
3 [Color Shading Adjustment] button<br />
Starts the Color Shading Adjustment.<br />
4 [Disconnect] button<br />
Cancels the connection to the camera.