The Official JungleFlasher User Guide

To overcome this, we can change one string in the drives Firmware, making
one drive, report as the other, this fools the Xbox 360, but has an adverse
affect with JungleFlasher as it will also report as the “other” drive.
Just treat it as the drive it really is, so if it is physically a Samsung, unlock it
like a Samsung, write Samsung Firmware too it (with spoofed OSIG)
I LiteOn Erased my LiteOn and it failed / Device Intro Failed, now JungleFlasher
won’t detect my drive!
Calm down, your drive isn’t bricked! JungleFlasher tries to automate as
much of the process as possible, making it seamless. This time, sadly, it
didn’t work.
All you need to do is manually do the process again, power cycle the Drive,
then send a MTK Intro to the drive.
JungleFlasher Will not see the Drive (No Drive Detected) as it is actually,
now erased.
I get “Drive Rev Undetermined… Aborting!” When trying to dump my Hitachi
There are two main causes for this, the main one being a user trying to
dump the drive using WinAPI but not having the correct drive selected in
the Top Right drop down box. Try closing JungleFlasher, scanning in Device
Manager and reopening JungleFlasher.
The second is caused by trying to dump a v79 that hasn’t been 79unlocked
I’ve set Mode-B but my drive won’t show in the drop down box.
If using Windows Vista, or Windows 7, please close JungleFlasher, scan in
Device Manager and re-open JungleFlasher, if this doesn’t help, please
leave your drive tray Ejected, and reboot your PC with drive still powered
and in Mode-B. If the problem persists, please feel free to join the support
channel and seek further assistance. HERE
If you are using PortIO option in Hitachi tab – It’s not meant to!
Page 217 of 223
Things not going as expected? – Read the FAQ’s