The Official JungleFlasher User Guide
The Official JungleFlasher User Guide
The Official JungleFlasher User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
IF you have previously flashed this drive and think you have its details in the Key Database –<br />
Consider this option! No need to re-dump or MRA the drive?<br />
– CLICK HERE –<br />
74850C<br />
(Requires extra HW if stock)<br />
See Note 2<br />
LiteOn PLDS DG-16D2S<br />
Which FW Revision?<br />
(read the label on drive lid)<br />
Otherwise continue through the flowchart<br />
Stock Firmware? No?<br />
Pre-iX LT, continue down chart! –<br />
If LT See Notes 1&2<br />
Stock Firmware?<br />
Yes Yes<br />
Previously obtained<br />
LiteOn files, but don’t<br />
have Dummy.bin<br />
CLICK HERE<br />
83850C<br />
(SATA only)<br />
See Note 2<br />
CLICK HERE CLICK HERE<br />
CLICK HERE<br />
LiteOn Erase/Write –<br />
CLICK HERE<br />
1. If your Drive has been previously flashed with iXtreme LT – then you will no longer be<br />
able to use 74850C or 83850C v1 or ‘Dummy-from-iXtreme’ methods to retrieve<br />
Dummy.bin! A full dump can still be performed using MRA method CLICK HERE<br />
2. During Flashing process – IF your drive has been flashed before (i.e. NOT a VIRGIN<br />
DRIVE) OR you have not used MRA hack to get a FULL OFW, then you are going to get a<br />
statement like this: This is normal for a PRE-FLASHED<br />
drives or you have used a Dummy.bin – Ignore it!<br />
If you wish to include this info from a 74850C or 83850C v1 VIRGIN drive – you must do<br />
a full dump using MRA style method - CLICK HERE<br />
Page 87 of 223<br />
Things not going as expected? – Read the FAQ’s<br />
83850C V2 or 93450C<br />
(Pre-flashed with ix1.61- CLICK HERE )<br />
STOCK Firmware OR iX LT - CLICK HERE<br />
(Additional skills and some modification<br />
req’d)<br />
83850C, tried it but JF says<br />
it’s a V2?<br />
FOLLOW LINK ABOVE!
Change language