The Official JungleFlasher User Guide

You will then be presented with the screen below,
You can alter the drive key by manually typing it/pasting it/loading a saved key.bin
(Key.bin can be saved by loading donor drives firmware in FirmwareTool32 as Source and Clicking Save Drive Key.)
You can Change the OSIG (ID String) by selecting the desired drive from the drop down list,
And IF you have selected a LiteOn drive from OSIG list then you are able to enter the liteon
Barcode details by either:
1. If you have the Inquiry.bin from the Donor Lite-On, you can load it through Load bin
file button and navigating to the file and opening it.
2. If you have the Donor Lite-On Drive to hand, you can manually type the
Alphanumeric code on the top of the Drive like shown below
When you have selected ALL the sections you require to be changed, press the OK Button
Page 76 of 223
Things not going as expected? – Read the FAQ’s