The Official JungleFlasher User Guide

PROBE VARIATIONS AND LED INDICATION AS FOLLOWS
CHECKED / SELECTED THIS WHAT YOU SHOULD SEE DO THIS
Using USB cable to connect (can also use
serial)
Using USB cable to connect (can also use
serial)
CK3 PROBE
XECUTER PROBE 2 (in PROBE v1 MODE)
Page 96 of 223
Things not going as expected? – Read the FAQ’s
BLUE POWER LED
LIT
GREEN LED LIT
(once probe
touches R707 to
indicate a good
circuit/connection)
Mode switch to
PROBE,
BLUE POWER LED
LIT (power
supplied to probe)
GREEN
CONENCTION LED
LIT - (indicates
good connection
to R707 circuit)
ORANGE
STANDBY LED
EXTINGUISHED
(safety circuit
disengaged)
PRESS
DVDKey32
button to
commence
the read
sequence
PRESS
DVDKey32
button to
commence
the read
sequence