The Official JungleFlasher User Guide

Obtaining Key/Inquiry/Identify and Dummy.bin from iXtreme flashed
Lite-On Drives (DOES NOT WORK ON iXtreme LT)
LiteOn drives of either FW version that have already been flashed with iXtreme can be easily
dumped using only SATA connection (no requirement for probe or TTL convertor) this is a
function of the iXtreme firmware NOT a workaround for dumping stock drives!
For this method, we still need to power on the drive with the “half open tray”.
FOR INSTRUCTIONS ON HALF OPEN TRAY – CLICK HERE
Now, with the eject status set, Open JungleFlasher, you will be presented with the Welcome
Screen. After a few seconds the main window will load.
Now, click the DVDKey32 Tab
Select Correct I/O port (check for drive properties in the Drive Properties section) it should
report as PLDS DG-16D2S (unless spoofed), you can choose to dump dummy.bin only as
opposed to all 5 files (Key, Inquiry, Identify, Serial and dummy.bin) as dummy.bin contains all
the information of the other 4 files.
Page 92 of 223
Things not going as expected? – Read the FAQ’s