WebPAM User v1.5 - Promise Technology, Inc.
WebPAM User v1.5 - Promise Technology, Inc.
WebPAM User v1.5 - Promise Technology, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>WebPAM</strong> <strong>User</strong> Manual<br />
If any bad sectors are found, they are listed here. <strong>WebPAM</strong> informs you by popup<br />
and email messages when a bad sector error is logged (see page 38).<br />
After 10 bad sectors have been discovered on a physical drive, <strong>WebPAM</strong> issues<br />
a warning to replace the drive.<br />
After 20 bad sectors have been discovered:<br />
• On fault-tolerant (RAID 1, 5 or 10) logical drives, the FastTrak controller will<br />
set down the physical drive (take it offline) and the logical drive will go<br />
critical.<br />
Replace the physical drive and rebuild your logical drive.<br />
• On non-fault-tolerant (RAID 0) logical drives, the physical drive remains<br />
online.<br />
Backup your data, replace the physical drive, create a new logical drive and<br />
copy your data to it.<br />
See “Logical Drive Rebuild” on page 73 and “Logical Drive Critical / Offline” on<br />
page 79.<br />
See the FastTrak <strong>User</strong> Manual and SuperSwap <strong>User</strong> Manual for more<br />
information about replacing a physical drive.<br />
Locate a Physical Drive<br />
When it becomes necessary to access a physical drive installed in a SuperSwap<br />
enclosure, this function will help you identify the physical drive you want. To<br />
locate a physical drive:<br />
1. Click on the Physical Drive View icon in Tree View.<br />
2. Click on the Physical Drive icon.<br />
3. Click on the Locate Drive tab in Management View.<br />
60