StarNet v6 manual - Engineering Surveyor

4.4 Setting Project Options
Chapter 4 Options
To set options for your project, choose Options>Project, or press the Project Options
tool button. Use the tabbed dialog to change settings in the several categories and press
OK to save. The following pages describe all option settings in detail.
Adjustment Options
In the Adjustment Options dialog, you select the settings which describe your adjustment
such as whether it is a 2D, 3D or Lev adjustment, the units to be used, whether it is a
local or grid job, plus a few other basic settings. Only relevant fields are active. For
example, the dialog above is set for a 2D job, therefore the default Average Project
Elevation field is active. If this were a 3D job, that field would be inactive since
elevation information would be included in your data. A “Lev” adjustment is available
only in the PLUS, PRO and LEV editions, and is shown inactive here. Settings made in
this dialog may cause sections in other options dialogs to be active or inactive.
Option Group: Adjustment Type
Select whether your adjustment is 2D, 3D or Lev. Results from a 2D adjustment contain
northings and eastings, a 3D adjustment also includes elevations and a Lev adjustment
contains elevations only.
17