2012 Chrysler Town & Country Users Guide

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
13.4 Quarts (12.6 Liters) Includes heater and coolant
recovery bottle filled to MAX level. Add 2.9 Quarts
(2.8 Liters) if equipped with rear heater.
Engine Coolant 3.6L MOPAR® Antifreeze/Coolant Five Year/100,000 Mile
Formula HOAT (Hybrid Organic Additive Technology)
MAINTAINING YOUR VEHICLE
or equivalent.
Engine Oil with Filter 3.6L API certified 5W-30 engine oil, meeting the
6 Quarts (5.6 Liters)
requirements of Chrysler Material Standard MS-6395.
Refer to your oil filler cap for correct SAE grade.
Engine Oil Filter 3.6L MOPAR® Engine Oil Filter or equivalent. —
Spark Plug 3.6L RER8ZWYCB4 (Gap 0.043 in [1.1 mm]) —
Automatic Transmission MOPAR® ATF+4® Automatic Transmission Fluid or
—
equivalent licensed ATF+4® product.
Brake Master Cylinder MOPAR® DOT 3 and SAE J1703 should be used or
equivalent. If DOT 3 is not available, then DOT 4 is
—
acceptable. Use only recommended brake fluids.
Power Steering Reservoir MOPAR® Power Steering Fluid +4 or MOPAR®
ATF+4® Automatic Transmission Fluid or equivalent
—
licensed ATF+4® product.
Fuel Selection 3.6L 87 Octane 20 Gallons (76 Liters) (Approximate)
E-85 Flexible Fuel – 3.6L Engine Only
CAUTION!
Only vehicles with the E-85 fuel filler door label or a yellow gas cap can operate on E-85.
• Refer to your Owner's Manual on the DVD for further details.
109