07.02.2013 Views

2012 Chrysler Town & Country Users Guide

2012 Chrysler Town & Country Users Guide

2012 Chrysler Town & Country Users Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

• Place the ignition switch in the ON position, select Remote Linked to Memory in the<br />

Electronic Vehicle Information Center (EVIC) and enter Yes.<br />

• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob.<br />

CAUTION!<br />

DO NOT place any article under a power seat or impede its ability to move as it may cause<br />

damage to the seat controls. Seat travel may become limited if movement is stopped by an<br />

obstruction in the seat's path.<br />

WARNING!<br />

• Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the<br />

seat could cause you to lose control. The seat belt might not be properly adjusted, and<br />

you could be severely injured or killed. Only adjust a seat while the vehicle is parked.<br />

• Do not ride with the seatback reclined so that the seat belt is no longer resting against<br />

your chest. In a collision, you could slide under the seat belt and be severely injured or<br />

killed. Use the recliner only when the vehicle is parked.<br />

REAR SEATS<br />

Second Row Seats – Stow 'n Go®<br />

GETTING STARTED<br />

• On vehicles equipped with Stow 'n Go®<br />

seats, the seats will fold and tumble in one<br />

motion.<br />

• Move the front seat fully forward.<br />

• Recline the front seatback fully forward.<br />

• Raise the armrests on the second row seat.<br />

NOTE: Seat will not stow in the storage bin<br />

unless the armrests are raised.<br />

• Slide the storage bin locking mechanism<br />

to the “LOCK” position and then pull up<br />

on the storage bin latch to open the cover.<br />

19

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!