Catalyst Manual - Cal Stage

DMX In Panel
CHAPTER 4
Windows Menus
Use the DMX In panels to patch layers as well as other inputs for DMX control. There are
multiple DMX In panels in each Catalyst Software Version to allow setting DMX start
channel values for one of the following Devices:
• Layer image
• Layer volume control
• Preset Trigger
• RS 422 devices
• Serial Trigger
• ArtNet protocol
Yellow outline
indicates DMX On
Video Input
Video feeds can be manipulated with the Layer’s parameters in the same manner as
content played back from the hard drive. For more information, see Video Input on page
127.
On Button
Video
Input Field
Sound Input
Choose CIB DMX
interface or ArtNet
Type in Start
Channel number
Select Device
Catalyst Pro, DV and Xpress versions can all convert audio to a visual waveform. The
waveform can then be manipulated with the Layer’s parameters in the same manner as
content played back from the hard drive.activates audio input. This panel activates the
audio input. For more information on the audio feature, see Audio Input on page 123.
Click on the round On/Off button to activate the Video Input panel
Catalyst® V3 Media Server User Manual 25