Catalyst Manual - Cal Stage

CHAPTER 7
Movement and Size
The layer’s image can be rotated on each axis by adjusting the DMX value of the
appropriate X, Y, and Z Rotation parameters. The suggested default value for each
channel is the midpoint of the parameter’s 16-bit DMX range, which is equal to no
rotation. Increasing the DMX value from the midpoint indexes the image clockwise; as
reducing the DMX value below the midpoint, indexes the image counterclockwise.
X, Y, and Z Rotation parameter DMX values greater than the 720° limit in either direction,
will start the image rotating continuously. Further adjustments to the DMX values will
increase the speed of continuous rotation
.
48 Catalyst® V3 Media Server User Manual