GeoVision V8.5 Feature Guide (PDF) - XTECHCAM

2
Main System
2.6 Wide Angle Lens Dewarping to Correct Distortion
If the camera image appears warped toward the edges, you can enable the Wide Angle Lens
Dewarping function to correct the distortion.
1. Click the Configure button, select System Configure and select Camera Configure.
2. Use the Camera Lens drop-down list to select Wide Angle.
Figure 2–8
3. Click the button. This dialog box appears.
Figure 2–9
4. Move the slider at the bottom to adjust the degree of warping. The adjusted view is shown
on the right.
5. Click OK.
6. On the main screen, right-click the live view, select the camera number and select Wide
Angle Lens Dewarping to apply the setting.
15