GeoVision V8.5 Feature Guide (PDF) - XTECHCAM

More documents

Recommendations

Info

Use the RTSP command below to connect: 92 rtsp://:@:/ For example, rtsp://admin:1234@192.168.3.111:8554/cam1_stream2 Note: The 4 matrix channels can be accessed using camera number 33 to 36. For example, the RTSP command for the second matrix channel may be rtsp://admin:1234@192.168.3.111:8554/cam34_stream1 To create a matrix channel, see Setting Up Matrix section later in this chapter.
10.3 Connecting through GeoVision Protocol 10 Mobile Server GV-Decoder Box, GV-AView and GV-Eye can access the devices connected to GV-System through GeoVision protocol. To change the command port and login method: 1. Click the GeoProtocol tab. This window appears. Figure 10-3 2. Type a Command Port number or keep the default port number 50000. 3. To use the login information of GV-System, select GeoVision DVR/NVR. 4. To use custom login information, select Custom and type the IP and Password. 5. Click Apply. Note: GV-Mobile Server is not supported on GV-AView V1.0 / 1.1 and GV-Eye V1.0. To check for latest updates on GV-Mobile Phone Applications, go to http://www.geovision.com.tw/english/5_4.asp. 93
Page 1 and 2:
New Feature Guide V8.5
Page 3 and 4:
Feature Guide for V8.5 GeoVision Su
Page 5 and 6:
4. Center V2.......................
Page 7 and 8:
1 New Supports and Specifications 1
Page 9 and 10:
1 New Supports and Specifications R
Page 11 and 12:
1 New Supports and Specifications 1
Page 13 and 14:
HUNT Pelco 1 New Supports and Speci
Page 15 and 16:
2. Main System This chapter introdu
Page 17 and 18:
2.2 Live View Frame Rate Control an
Page 19 and 20:
2.4 Automatic Setup of IP Devices 2
Page 21 and 22:
2 Main System 2.6 Wide Angle Lens D
Page 23 and 24:
2.8 Object Tracking in Fisheye Live
Page 25 and 26:
2.9 Enhanced Object Definition in I
Page 27 and 28:
2 Main System 2.11 Noise Tolerance
Page 29 and 30:
2.13 Enhanced Support for POS Text
Page 31 and 32:
2 Main System b. Select OPOS Printe
Page 33 and 34:
3. ViewLog This chapter introduces
Page 35 and 36:
3.2.2 Direct Merge When Saving as A
Page 37 and 38:
3 ViewLog 3.3 Monitoring of Vehicle
Page 39 and 40:
To Enable the Face Mask for an User
Page 41 and 42:
To save dewarped fisheye view in AV
Page 43 and 44:
3. Type the message text and click
Page 45 and 46:
To configure the Event tabs on the
Page 47 and 48: 4.2.3 Setting Alert Levels of Event
Page 49 and 50: 4.3 New and Enhanced Video Storage
Page 51 and 52: 4.3.2 Storing Video Files in Separa
Page 53 and 54: 4.4 Configuring a Virtual I/O Box 4
Page 55 and 56: 4.5 Enhanced EZ Player 4.5.1 Wide A
Page 57 and 58: 5. VSM (Vital Sign Monitor) This ch
Page 59 and 60: 3. To view these events, click View
Page 61 and 62: To configure the temperature alarm:
Page 63 and 64: 5.3 Enhanced Notification Messages
Page 65 and 66: 5.3.2 Notification Messages on Syst
Page 67 and 68: 6. Control Center This chapter intr
Page 69 and 70: 6 Control Center C. Configure the Z
Page 71 and 72: Figure 6-7 6 Control Center Note: A
Page 73 and 74: Control Center 6. A “Connected”
Page 75 and 76: To access this feature from Matrix
Page 77 and 78: 4. Assign a camera for its live vie
Page 79 and 80: 6.5 Setting the Matrix Display Moni
Page 81 and 82: � Counter: counter events � POS
Page 83 and 84: 7.2 Designating a Primary Center V2
Page 85 and 86: 8 GV-GIS 2. To add a recording path
Page 87 and 88: 8.2 Recording Manually 8 GV-GIS If
Page 89 and 90: 8.3 Recording by Events 8 GV-GIS Yo
Page 91 and 92: 8.4 Recording upon Input Trigger 8
Page 93 and 94: 9. Authentication Server 9 Authenti
Page 95 and 96: Authentication Server B. Select the
Page 97: 6. Type a new server name. 10 Mobil
Page 101 and 102: 6. In the left menu, right-click a
show all

GeoVision V8.5 Feature Guide (PDF) - XTECHCAM

Create successful ePaper yourself

Delete template?

Save as template?